AF 171
Universal vinyl adhesive (AU) · AU · manufacturer-sourced
How long does ARDEX AF 171 take to cure?
Short answer
Return-to-use gates
Walk, furniture and full traffic open at different times
- Apply the Universal vinyl adhesive (AU) to a clean, dry subfloor
- Stay off until the foot-traffic time
- Bring in furniture and heavy use later
This product’s stated stages Quoted at 73°F
- Working time ends15 minutes
- Full cure3 days
Worth noticing: Working time is only 15 minutes; the next stated stage, full cure, is 3 days.
Common mistake: Moving furniture back the day after, while the surface is still soft.
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Time returning to use
Your countdown
Stated times
- Working time ends15 minutes
- Full cure3 days
From ARDEX data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: ardex.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet.
- Region AU. Formulas can differ between countries; check your container.
- Working time ends: At 20°C (68°F).
- Full cure: At 20°C (68°F).
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- ARDEX AF 171
- Variant
- Universal vinyl adhesive (AU)
- Region
- AU
- Listed use
- vinyl flooring
- Timed stages recorded
- tooling, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet copy · Data sheet Jan 2025
Condition attached to the stated time: At 20°C (68°F).
About this product
Wet-set working time is short, 15 minutes, with a flash time of 40 to 50 minutes for the dry-bond method.
Using this specific product
ARDEX AF 171 is listed here as the Universal vinyl adhesive (AU) version for vinyl flooring. For installing or finishing a floor, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Universal vinyl adhesive (AU); related versions can use different timing.
- For vinyl flooring, pay particular attention to subfloor condition, trowel coverage, room temperature and traffic plan.
- At 20°C (68°F).
How to check readiness
Test the least-ventilated area before walking, covering or replacing furniture. The sheet gives a working time of 15 minutes wet-set. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.
Avoid this mistake
Foot traffic, furniture and rugs can have different return times.
Compare with similar products
- Compare with Bona Traffic HDFull cure: 3 days there, 3 days here.
- Compare with Bona Traffic HDFull cure: 3 days there, 3 days here.
Questions
How long does this product take to cure?
ARDEX states: The sheet gives a working time of 15 minutes wet-set. Conditions: At 20°C (68°F).. The sheet gives cure at 72 hours. Conditions: At 20°C (68°F).. These are the manufacturer’s stated times, not a guarantee.
How long does AF 171 take to cure?
The sheet gives 72 hours at 20°C.
How long do I have to work with this product?
ARDEX states: The sheet gives a working time of 15 minutes wet-set. Conditions: At 20°C (68°F).. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Floor times assume the stated temperature and humidity. Cold slabs, thick coats and damp subfloors lengthen them. Follow the current data sheet. Follow the product label for your conditions.