W. R. Meadows

VOCOMP-20

Water-based acrylic curing and sealing compound · US · manufacturer-sourced

Check your container: This countdown is for the Water-based acrylic curing and sealing compound variant. Similar-looking versions may have different times.

How long before you can walk on W. R. Meadows VOCOMP-20?

Short answer

Light foot traffic: 4–12 hours after application.
Concrete & repair

Placement-to-service plan

Set, hardening and loading come days apart

  1. Place and finish the Water-based acrylic curing and sealing compound
  2. Keep it moist or protected as directed
  3. Load it only at the stated strength time

This product’s stated stages Quoted at 73°F

  • Light foot traffic4–12 hours

Worth noticing: The manufacturer states only one timing here (light foot traffic, 4–12 hours); nothing else is inferred.

Common mistake: Driving on it because it feels hard; strength keeps building for days.

Concrete & repair

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Time the concrete cure

When was the concrete placed?
Conditions that affect drying
Where?
Thickness

Stated times

  • Light foot traffic4–12 hours

From W. R. Meadows data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: wrmeadows.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Concrete sealer times are lab values. Cool air, humidity, thick coats and poor airflow slow them. Follow the current data sheet.
  • Apply at 40°F or above
  • Region US. Formulas can differ between countries; check your container.
  • Light foot traffic: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
W. R. Meadows VOCOMP-20
Variant
Water-based acrylic curing and sealing compound
Region
US
Listed use
concrete curing, concrete sealing
Timed stages recorded
light foot
Source checked
2026-10-25

Documentation: Technical data sheet copy · No. 368-A, October 2019

Condition attached to the stated time: The source gives no conditions for this time.

About this product

A curing and sealing compound whose sheet gives one number, at least 4 hours off foot traffic with 12 preferred. A second coat goes on once the first has thoroughly dried, but densely troweled floors take a single coat only.

Using this specific product

W. R. Meadows VOCOMP-20 is listed here as the Water-based acrylic curing and sealing compound version for concrete curing and concrete sealing. For repairing concrete or masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Water-based acrylic curing and sealing compound; related versions can use different timing.
  • For concrete curing and concrete sealing, pay particular attention to substrate moisture, depth, temperature and protection from traffic.
  • The source gives no conditions for this time.

How to check readiness

Check the slowest, coolest section before loading or coating. Try a protected edge first and avoid turning, dragging or concentrated loads.

Avoid this mistake

Early strength, coating readiness and full cure are separate decisions.

Compare with similar products

Keep going

Questions

How long before you can walk on this product?

W. R. Meadows states: The sheet says to restrict foot traffic for at least four hours and that twelve hours is preferable. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

Can I put a second coat of VOCOMP-20 on a troweled floor?

The sheet says dense surfaces such as densely troweled floors take a single coat only. Broomed finishes on new concrete should get a second application.

What affects how long this product takes to dry or cure?

Concrete sealer times are lab values. Cool air, humidity, thick coats and poor airflow slow them. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All concrete and repair products