Rust-Oleum

Metallic Garage Floor Paint + Primer

Gunmetal (SKU 349353) · US · not yet reviewed

Check your container: This countdown is for the Gunmetal (SKU 349353) variant. Similar-looking versions may have different times.

How long before you can recoat Rust-Oleum Metallic Garage Floor Paint + Primer?

Short answer

Ready for another coat: 4–6 hours after application.
Not paintable.
Concrete & repair

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Calculate return-to-use time

When was the material placed?
Conditions that affect drying
Where?
Thickness

Stated times

  • Ready for another coat4–6 hours
  • Light foot traffic4–6 hours
  • Normal foot traffic1 day
  • Heavy traffic5 days
  • Paint-readyNot paintable

From Rust-Oleum data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: rustoleum.com

Conditions & fine print
  • Stated conditions: 70°F (21°C) and 50% relative humidity
  • Dry times increase at cooler temperatures with no figures given. Allow new concrete to cure a minimum of 28 days. Do not paint outdoors if rain is expected within 48 hours. The sheet gives no dry-to-touch time.
  • Temperature range: 50°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Ready for another coat: At 70 to 80°F (21 to 27°C) and 50% relative humidity.
  • Light foot traffic: At 70°F (21°C) and 50% relative humidity.
  • Normal foot traffic: At 70°F (21°C) and 50% relative humidity.
  • Heavy traffic: At 70 to 80°F (21 to 27°C) and 50% relative humidity.
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

Rust-Oleum Metallic Garage Floor Paint + Primer is listed here as the Gunmetal (SKU 349353) version for garage floor, metallic floor, and concrete. For repairing concrete or masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Gunmetal (SKU 349353); related versions can use different timing.
  • For garage floor, metallic floor, and concrete, pay particular attention to substrate moisture, depth, temperature and protection from traffic.
  • At 70 to 80°F (21 to 27°C) and 50% relative humidity. At 70°F (21°C) and 50% relative humidity.

How to check readiness

Check the slowest, coolest section before loading or coating. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Try a protected edge first and avoid turning, dragging or concentrated loads. Normal foot traffic in 24 hours.

Avoid this mistake

Early strength, coating readiness and full cure are separate decisions.

Questions

How long before you can recoat this product?

Rust-Oleum states: Recoat in 4 to 6 hours. Conditions: At 70 to 80°F (21 to 27°C) and 50% relative humidity.. Ready for light foot traffic in 4 to 6 hours. Conditions: At 70°F (21°C) and 50% relative humidity.. Normal foot traffic in 24 hours. Conditions: At 70°F (21°C) and 50% relative humidity.. For full cure and vehicle traffic, allow 5 days. Conditions: At 70 to 80°F (21 to 27°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long before I can walk on tile set with this product?

Rust-Oleum states: Ready for light foot traffic in 4 to 6 hours. Conditions: At 70°F (21°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How long before heavy traffic is safe on this product?

Rust-Oleum states: For full cure and vehicle traffic, allow 5 days. Conditions: At 70 to 80°F (21 to 27°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry times increase at cooler temperatures with no figures given. Allow new concrete to cure a minimum of 28 days. Do not paint outdoors if rain is expected within 48 hours. The sheet gives no dry-to-touch time. Follow the product label for your conditions.

Similar products

All concrete and repair products