W-Poxi TFP 30
Epoxy intermediate and finish · INTL · manufacturer-sourced
How long before you can recoat WEG W-Poxi TFP 30?
Short answer
Film-build schedule
Recoat has a floor and a ceiling, and film thickness moves both
- Prepare the surface and apply the Epoxy intermediate and finish to the stated thickness
- Recoat inside the window the data sheet gives
- Return to service only at the stated cure
This product’s stated stages Quoted at 77°F
- Safe to touch2 hours
- Working time ends6 hours
- Safe to handle10 hours
- Ready for another coat10 hours
- Recoat window closes3 days
- Full cure7 days
Worth noticing: Recoat inside the window: not before 10 hours and not after 3 days.
Common mistake: Recoating after the maximum window has closed; the next coat may not bond without abrading.
Coat timeline
Plan the next coat and final use separately
- 1ApplyUse the Epoxy intermediate and finish directions and prepare for steel coating.
- 2Next coatUse the listed recoat milestone; do not substitute touch-dry time.
- 3Normal useWait for the applicable handling, water or cure milestone.
Check the recoat window
Your countdown
Stated times
- Working time ends6 hours
- Safe to touch2 hours
- Safe to handle10 hours
- Recoat window closes3 days
- Ready for another coat10 hours
- Full cure7 days
From WEG data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: weg.net
Conditions & fine print
- Stated conditions: 77°F (25°C)
- Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions.
- Temperature range: 50°F to 95°F
- Region INTL. Formulas can differ between countries; check your container.
- Working time ends: Values are for 25°C (77°F). The sheet also lists 10°C and 35°C columns.
- Safe to touch: 6 hours at 10°C and 1 hour at 35°C.
- Safe to handle: 18 hours at 10°C and 6 hours at 35°C.
- Recoat window closes: 96 hours at 10°C and 48 hours at 35°C.
- Ready for another coat: 18 hours at 10°C and 6 hours at 35°C.
- Full cure: 240 hours at 10°C and 120 hours at 35°C.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- WEG W-Poxi TFP 30
- Variant
- Epoxy intermediate and finish
- Region
- INTL
- Listed use
- steel coating
- Timed stages recorded
- tooling, touch, handle, recoat max, recoat min
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet, reviewed 4 February 2026
Condition attached to the stated time: Values are for 25°C (77°F). The sheet also lists 10°C and 35°C columns.
About this product
An epoxy with a recoat window from 10 to 72 hours at 25°C and a pot life of 6 hours.
Using this specific product
WEG W-Poxi TFP 30 is listed here as the Epoxy intermediate and finish version for steel coating. For coating steel or industrial surfaces, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Epoxy intermediate and finish; related versions can use different timing.
- For steel coating, pay particular attention to surface preparation, film thickness, temperature, dew point and pot life.
- Values are for 25°C (77°F). The sheet also lists 10°C and 35°C columns. 6 hours at 10°C and 1 hour at 35°C. 18 hours at 10°C and 6 hours at 35°C. 96 hours at 10°C and 48 hours at 35°C. 240 hours at 10°C and 120 hours at 35°C.
How to check readiness
Check dry film thickness and the recoat window before the next coat. The sheet gives a pot life of 6 hours. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Lift or move the item gently and avoid twisting the bond or pressing finished faces together.
Avoid this mistake
Recoat windows can close; past the maximum, abrading is usually required.
Compare with similar products
- Compare with Jotun Jotamastic SFRecoat: 10.5 h there, 10 h here.
- Compare with International (AkzoNobel) Interzinc 2265Recoat: 9 h there, 10 h here.
Questions
How long before you can recoat this product?
WEG states: The sheet gives a pot life of 6 hours. Conditions: Values are for 25°C (77°F). The sheet also lists 10°C and 35°C columns.. The sheet gives touch dry at 2 hours at 25°C. Conditions: 6 hours at 10°C and 1 hour at 35°C.. The sheet gives handling dry at 10 hours at 25°C. Conditions: 18 hours at 10°C and 6 hours at 35°C.. The sheet gives a maximum recoat of 72 hours at 25°C. Conditions: 96 hours at 10°C and 48 hours at 35°C.. The sheet gives a minimum recoat of 10 hours at 25°C. Conditions: 18 hours at 10°C and 6 hours at 35°C.. The sheet gives final cure at 168 hours at 25°C. Conditions: 240 hours at 10°C and 120 hours at 35°C.. These are the manufacturer’s stated times, not a guarantee.
What is the TFP 30 recoat window at 25°C?
The sheet gives 10 hours minimum and 72 hours maximum.
How long does this product take to fully cure?
WEG states: The sheet gives final cure at 168 hours at 25°C. Conditions: 240 hours at 10°C and 120 hours at 35°C.. These are the manufacturer’s stated times, not a guarantee.
How long do I have to work with this product?
WEG states: The sheet gives a pot life of 6 hours. Conditions: Values are for 25°C (77°F). The sheet also lists 10°C and 35°C columns.. These are the manufacturer’s stated times, not a guarantee.
How long until this product is safe to touch?
WEG states: The sheet gives touch dry at 2 hours at 25°C. Conditions: 6 hours at 10°C and 1 hour at 35°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions. Follow the product label for your conditions.