Premium Floor Finish (350 VOC)
Oil-based · US · not yet reviewed
Short answer
Ready for another coat: 12 hours after application.
Light use: 1 day after application.
Start the clock
Your countdown
Stated times
- Safe to touch2 hours
- Ready for another coat12 hours
- Light use1 day
- Normal use3 days
From Varathane (Rust-Oleum) data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.
Conditions & fine print
- Stated conditions: 70–80°F (21–27°C) and 50% relative humidity
- Recoat only once the coat has dried clear and feels hard, and lightly sand between coats. Apply below 85% humidity.
- Temperature range: 55°F to 90°F
- Region US. Formulas can differ between countries; check your container.
- Safe to touch: 70–80°F and 50% RH
- Ready for another coat: Dried clear and hard
- Entered from the manufacturer source; second review pending. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Questions
How long before Premium Floor Finish (350 VOC) is ready for another coat?
Varathane (Rust-Oleum) states: Allow finish to dry a minimum of 12 hours and then recoat. Conditions: Dried clear and hard. This is the manufacturer’s stated time, not a guarantee.
How long before Premium Floor Finish (350 VOC) is light use?
Varathane (Rust-Oleum) states: Allow finish to dry 24 hours before light use. This is the manufacturer’s stated time, not a guarantee.