Valspar

Pro-Hide Gold Ultra Exterior Self-Priming Paint

Exterior house paint · US · manufacturer-sourced

Check your container: This countdown is for the Exterior house paint variant. Similar-looking versions may have different times.

How long before you can recoat Valspar Pro-Hide Gold Ultra Exterior Self-Priming Paint?

Short answer

Ready for another coat: 4 hours to 1 day after application.
Safe to touch: 1–2 hours after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Exterior house paint in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 77°F and 50% humidity

  • Safe to touch1–2 hours
  • Ready for another coat4 hours to 1 day

Worth noticing: Safe to touch at 1–2 hours; ready for another coat at 4 hours to 1 day.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Exterior house paint directions and prepare for exterior paint and siding.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch1–2 hours
  • Ready for another coat4 hours to 1 day

From Valspar product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: valspar.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Drying and recoat times change with temperature, humidity, film thickness and airflow. Check the current can label for your exact color base and sheen. Do not paint if temperatures are expected below 35°F (2°C) within 48 hours of application or if heavy dew or precipitation is expected in the next 2.5 hours (page text).
  • Temperature range: 35°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: At 77°F (25°C) and 50% relative humidity.
  • Ready for another coat: At 77°F (25°C) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Valspar Pro-Hide Gold Ultra Exterior Self-Priming Paint
Variant
Exterior house paint
Region
US
Listed use
exterior paint, siding
Timed stages recorded
touch, recoat min
Source checked
2026-10-25

Documentation: Official product page · Manufacturer page; checked 2026-10-26

Condition attached to the stated time: At 77°F (25°C) and 50% relative humidity.

About this product

Pro-Hide Gold Ultra Exterior Self-Priming Paint is a paint, primer & patch product from Valspar, listed for exterior paint, siding. Its times are stated under: At 77°F (25°C) and 50% relative humidity. Its recoat time of 4 hours is shorter than 10% of the 231 paint, primer & patch products here that list one.

Using this specific product

Valspar Pro-Hide Gold Ultra Exterior Self-Priming Paint is listed here as the Exterior house paint version for exterior paint and siding. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Exterior house paint; related versions can use different timing.
  • For exterior paint and siding, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 77°F (25°C) and 50% relative humidity.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Valspar states: The product page gives 1 to 2 hours to touch. Conditions: At 77°F (25°C) and 50% relative humidity.. The product page gives 4 to 24 hours to recoat. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

How does Pro-Hide Gold Ultra Exterior Self-Priming Paint compare with other paint, primer & patch products?

Valspar states 4 hours for recoat, which is slower than the typical paint, primer & patch product here (median 2 hours across 231 products). The quickest listed is Valspar Latex Field Marking Paint at 30 minutes; the slowest is Rust-Oleum Stops Rust Clean Metal Primer Spray at 2 days.

Why does Pro-Hide Gold Ultra Exterior Self-Priming Paint show a range for touch?

The source gives 1–2 hours for touch. This site counts down to the earliest stated time (1 hour) and keeps the range visible so you can judge the rest from your conditions.

What conditions do the stated times for Pro-Hide Gold Ultra Exterior Self-Priming Paint assume?

Stated conditions: At 77°F (25°C) and 50% relative humidity. Baseline temperature: 77°F and 50% relative humidity. Application temperature: 35 to 90°F. Cooler, damper or thicker applications usually take longer.

How long until this product is safe to touch?

Valspar states: The product page gives 1 to 2 hours to touch. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Drying and recoat times change with temperature, humidity, film thickness and airflow. Check the current can label for your exact color base and sheen. Do not paint if temperatures are expected below 35°F (2°C) within 48 hours of application or if heavy dew or precipitation is expected in the next 2.5 hours (page text). Follow the product label for your conditions.

Similar products

All paints, primers and patching