Titebond (Franklin International)

Speed Set Wood Glue

Fast-set white glue · US · not yet reviewed

Check your container: This countdown is for the Fast-set white glue variant. Similar-looking versions may have different times.

How long should Titebond (Franklin International) Speed Set Wood Glue stay clamped?

Short answer

Clamps can come off: 15 minutes after application.
Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Fast-set white glue version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Calculate bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Clamps can come off15 minutes

From Titebond (Franklin International) product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: titebond.com

Conditions & fine print
  • Stated conditions: 70°F (21°C) and 50% relative humidity
  • The page gives open time of 2-4 minutes (70°F/50% RH/8% MC) and no full-cure time. Do not use when the temperature, glue or materials are below 59°F. Not for exterior use or where moisture is likely.
  • Temperature range: 59°F to —°F
  • Region US. Formulas can differ between countries; check your container.
  • Clamps can come off: 70°F, 50% RH, 8% moisture content
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

Titebond (Franklin International) Speed Set Wood Glue is listed here as the Fast-set white glue version for wood and woodworking. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Fast-set white glue; related versions can use different timing.
  • For wood and woodworking, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • 70°F, 50% RH, 8% moisture content.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. Remove pressure gradually and avoid loading the joint until its later strength milestone.

Avoid this mistake

Handling strength and full load strength are different milestones.

Questions

How long should this product stay clamped?

Titebond (Franklin International) states: Minimum clamp time is 15 minutes. Conditions: 70°F, 50% RH, 8% moisture content. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

The page gives open time of 2-4 minutes (70°F/50% RH/8% MC) and no full-cure time. Do not use when the temperature, glue or materials are below 59°F. Not for exterior use or where moisture is likely. Follow the product label for your conditions.

Similar products

All adhesives and glues