Titebond (Franklin International)

Titebond II Premium Wood Glue

Water-resistant (ANSI Type II) · US · not yet reviewed

Short answer

Clamps can come off: 30 minutes to 1 hour after application.
Normal use: 1 day after application.

Start the clock

When did you apply it?
Outdoors, temperature
Where?
Thickness

Stated times

  • Working time ends3–5 minutes
  • Clamps can come off30 minutes to 1 hour
  • Normal use1 day

From Titebond (Franklin International) product page, Titebond (Franklin International) data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.

Conditions & fine print
  • Stated conditions: 70°F and 50% relative humidity (assembly times)
  • Do not use when the temperature, glue or materials are below 55°F. Clamp times come from Titebond's general guidance; stressed joints need 24 hours in clamps.
  • Temperature range: 55°F to —°F
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: 70°F and 50% RH
  • Clamps can come off: Unstressed joints; stressed joints need 24 hours
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Questions

How long should Titebond II Premium Wood Glue be clamped?

Titebond (Franklin International) states: For most Titebond wood glues, clamp an unstressed joint for 30 minutes to an hour; stressed joints need 24 hours. Conditions: Unstressed joints; stressed joints need 24 hours. This is the manufacturer’s stated time, not a guarantee.

How long before Titebond II Premium Wood Glue is normal use?

Titebond (Franklin International) states: Do not stress the new joint for at least 24 hours. This is the manufacturer’s stated time, not a guarantee.

Similar products

All adhesives and glues