Taubmans

Tradex Acrylic Primer Undercoat

Trade acrylic primer undercoat (AU/NZ) · NZ · manufacturer-sourced

Check your container: This countdown is for the Trade acrylic primer undercoat (AU/NZ) variant. Similar-looking versions may have different times.

How long before you can recoat Taubmans Tradex Acrylic Primer Undercoat?

Short answer

Ready for another coat: 2 hours after application.
Safe to touch: 30 minutes after application.
Paint, primer & patch

Coat-by-coat plan

Touch-dry, recoat and washable are three different dates

  1. Cut in and roll the Trade acrylic primer undercoat (AU/NZ) in even coats
  2. Wait for the recoat time, not touch-dry
  3. Hold off scrubbing until the cure time

This product’s stated stages Quoted at 68°F and 65% humidity

  • Safe to touch30 minutes
  • Ready for another coat2 hours

Worth noticing: Safe to touch at 30 minutes; ready for another coat at 2 hours.

Common mistake: Closing the door or hanging pictures once the wall feels dry, long before the film has hardened.

Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Trade acrylic primer undercoat (AU/NZ) directions and prepare for interior and exterior walls.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next coat

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Ready for another coat2 hours

From Taubmans data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: wattyl.co.nz

Conditions & fine print
  • Stated conditions: 68°F (20°C) and 65% relative humidity
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
  • Apply at 50°F or above
  • Region NZ. Formulas can differ between countries; check your container.
  • Safe to touch: At 20°C and 65% relative humidity.
  • Ready for another coat: At 20°C and 65% humidity. Allow up to twice as long when cooler or more humid.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Taubmans Tradex Acrylic Primer Undercoat
Variant
Trade acrylic primer undercoat (AU/NZ)
Region
NZ
Listed use
interior and exterior walls
Timed stages recorded
touch, recoat min
Source checked
2026-10-25

Documentation: Technical data sheet · Data sheet issue 20/08/12

Condition attached to the stated time: At 20°C and 65% relative humidity.

About this product

A trade primer undercoat from a 2012 sheet: surface dry in 30 minutes, recoat after 2 hours, and up to twice that when cool or humid.

Using this specific product

Taubmans Tradex Acrylic Primer Undercoat is listed here as the Trade acrylic primer undercoat (AU/NZ) version for interior and exterior walls. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Trade acrylic primer undercoat (AU/NZ); related versions can use different timing.
  • For interior and exterior walls, pay particular attention to surface preparation, coat thickness and ventilation.
  • At 20°C and 65% relative humidity. At 20°C and 65% humidity. Allow up to twice as long when cooler or more humid.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Compare with similar products

Keep going

Questions

How long before you can recoat this product?

Taubmans states: The sheet gives surface dry at 30 minutes. Conditions: At 20°C and 65% relative humidity.. The sheet gives recoat at 2 hours. Conditions: At 20°C and 65% humidity. Allow up to twice as long when cooler or more humid.. These are the manufacturer’s stated times, not a guarantee.

How much longer does Tradex take in cool weather?

The sheet says to allow up to twice as long for cooler and more humid conditions.

How long until this product is safe to touch?

Taubmans states: The sheet gives surface dry at 30 minutes. Conditions: At 20°C and 65% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All paints, primers and patching