Soudaseal EPDM
Sealant for EPDM roofing and gutters (UK) · GB · manufacturer-sourced
How long does Soudal Soudaseal EPDM take to dry?
Short answer
Bead cure stages
Skin, tack-free and paint-ready are not the same moment
- Gun a continuous bead of Sealant for EPDM roofing and gutters (UK)
- Tool it inside the working time
- Keep it dry until the stated water-ready time
This product’s stated stages Quoted at 73°F and 50% humidity
- Safe to touch10 minutes
Worth noticing: The manufacturer states only one timing here (safe to touch, 10 minutes); nothing else is inferred.
Common mistake: Showering or painting at skin-over, when the bead is only crusted on the outside.
Bond-strength path
Assembly, handling and full load are different stages
Time the caulk cure
Your countdown
Stated times
- Safe to touch10 minutes
From Soudal data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: soudal.co.uk
Conditions & fine print
- Stated conditions: 73°F (23°C) and 50% relative humidity
- Sealant skin and tack-free times are for a thin film. Deep joints cure from the outside in and take longer. Follow the current data sheet.
- Region GB. Formulas can differ between countries; check your container.
- Safe to touch: At 23°C (73°F) and 50% relative humidity.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Soudal Soudaseal EPDM
- Variant
- Sealant for EPDM roofing and gutters (UK)
- Region
- GB
- Listed use
- EPDM roofing, gutters
- Timed stages recorded
- touch
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical data sheet rev. 16/07/2019
Condition attached to the stated time: At 23°C (73°F) and 50% relative humidity.
About this product
Skin forms in about 10 minutes and the sealant cures about 2 to 3 mm per 24 hours.
Using this specific product
Soudal Soudaseal EPDM is listed here as the Sealant for EPDM roofing and gutters (UK) version for EPDM roofing and gutters. For sealing a joint, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Sealant for EPDM roofing and gutters (UK); related versions can use different timing.
- For EPDM roofing and gutters, pay particular attention to joint depth, tooling, ventilation and exposure to water.
- At 23°C (73°F) and 50% relative humidity.
How to check readiness
Probe an inconspicuous edge for a continuous skin and follow the stated water-exposure milestone. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath.
Avoid this mistake
Surface skin is not the same as through-cure, especially in a deep joint.
Compare with similar products
- Compare with Evo-Stik Multi-Purpose Adhesive & SealantTouch-dry: 15 min there, 10 min here.
- Compare with Evo-Stik Sticks Like Sh*t SealantTouch-dry: 15–30 min there, 10 min here.
Questions
How long does this product take to dry?
Soudal states: The sheet gives a skin-forming time of about 10 minutes. Conditions: At 23°C (73°F) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.
How quickly does Soudaseal EPDM cure?
The sheet gives about 2 to 3 mm per 24 hours, with skin in about 10 minutes.
What affects how long this product takes to dry or cure?
Sealant skin and tack-free times are for a thin film. Deep joints cure from the outside in and take longer. Follow the current data sheet. Follow the product label for your conditions.