Selleys

No More Gaps Interior Fast Dry

Paintable acrylic gap filler (NZ) · NZ · manufacturer-sourced

Check your container: This countdown is for the Paintable acrylic gap filler (NZ) variant. Similar-looking versions may have different times.

How long before you can paint over Selleys No More Gaps Interior Fast Dry?

Short answer

Paint-ready: 10 minutes to 2 hours after application.
Safe to touch: 6 minutes after application.
Caulk & sealant

Bead cure stages

Skin, tack-free and paint-ready are not the same moment

  1. Gun a continuous bead of Paintable acrylic gap filler (NZ)
  2. Tool it inside the working time
  3. Keep it dry until the stated water-ready time

This product’s stated stages Quoted at 73°F

  • Safe to touch6 minutes
  • Ready to paint10 minutes to 2 hours

Worth noticing: Safe to touch at 6 minutes; ready to paint at 10 minutes to 2 hours.

Common mistake: Showering or painting at skin-over, when the bead is only crusted on the outside.

Caulk & sealant

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Paintable acrylic gap filler (NZ) version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time the caulk cure

When did you run the bead?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch6 minutes
  • Paint-ready10 minutes to 2 hours

From Selleys data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: selleys.co.nz

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Sealant skin and tack-free times are for a thin film. Deep joints cure from the outside in and take longer. Follow the current data sheet.
  • Region NZ. Formulas can differ between countries; check your container.
  • Safe to touch: The source gives no conditions for this time.
  • Paint-ready: Oil-based paints need 24 to 48 hours.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Selleys No More Gaps Interior Fast Dry
Variant
Paintable acrylic gap filler (NZ)
Region
NZ
Listed use
interior gaps, skirting and architraves
Timed stages recorded
touch, paint ready
Source checked
2026-10-25

Documentation: Technical data sheet · Data sheet v1.0, 08/03/2021

Condition attached to the stated time: The source gives no conditions for this time.

About this product

The paint-over time depends on the paint: 10 minutes for gloss, 100 for flat and 120 for ceiling paint, and 24 to 48 hours for oil-based.

Using this specific product

Selleys No More Gaps Interior Fast Dry is listed here as the Paintable acrylic gap filler (NZ) version for interior gaps and skirting and architraves. For sealing a joint, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Paintable acrylic gap filler (NZ); related versions can use different timing.
  • For interior gaps and skirting and architraves, pay particular attention to joint depth, tooling, ventilation and exposure to water.
  • The source gives no conditions for this time. Oil-based paints need 24 to 48 hours.

How to check readiness

Probe an inconspicuous edge for a continuous skin and follow the stated water-exposure milestone. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. The sheet allows gloss paint after 10 minutes, flat paint after 100 minutes and ceiling paint after 120 minutes.

Avoid this mistake

Surface skin is not the same as through-cure, especially in a deep joint.

Compare with similar products

Keep going

Questions

How long before you can paint over this product?

Selleys states: The sheet gives a skin time of about 6 minutes. Conditions: The source gives no conditions for this time.. The sheet allows gloss paint after 10 minutes, flat paint after 100 minutes and ceiling paint after 120 minutes. Conditions: Oil-based paints need 24 to 48 hours.. These are the manufacturer’s stated times, not a guarantee.

Why does the paint-over time vary from 10 to 120 minutes?

The sheet ties it to the paint type: 10 minutes for gloss, 100 for flat and 120 for ceiling paint.

How long until this product is safe to touch?

Selleys states: The sheet gives a skin time of about 6 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Sealant skin and tack-free times are for a thin film. Deep joints cure from the outside in and take longer. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All caulks and sealants