Blu Nylon Black
Nylon-like resin for LCD printers · US · manufacturer-sourced
How long should Siraya Tech Blu Nylon Black be left to cure?
Short answer
Cast-and-demold plan
Gel, demold and full cure are separate days
- Mix the Nylon-like resin for LCD printers to ratio and pour
- Wait for the demold time
- Sand or finish after full cure
This product’s stated stages Quoted at 73°F
- Curing period15 minutes
Worth noticing: The manufacturer states only one timing here (curing period, 15 minutes); nothing else is inferred.
Common mistake: Demolding early and leaving a soft, tacky casting that never fully hardens.
Project stage ladder
Demolding, handling, finishing and final use may occur at different times
For 3D printing and tough nylon-like parts, identify which stage the stated period 15 minutes milestone actually unlocks. Earlier handling does not prove final cure.
Time demold and cure
Your countdown
Stated times
- Curing period complete15 minutes
From Siraya Tech data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: siraya.tech
Conditions & fine print
- Stated conditions: 73°F (23°C)
- UV post-cure depends on lamp output and part shape. Follow the current data sheet.
- Region US. Formulas can differ between countries; check your container.
- Curing period complete: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Siraya Tech Blu Nylon Black
- Variant
- Nylon-like resin for LCD printers
- Region
- US
- Listed use
- 3D printing, tough nylon-like parts
- Timed stages recorded
- cure period
- Source checked
- 2026-10-25
Documentation: Technical data sheet copy · Undated technical data sheet
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A nylon-like resin cured about 15 minutes under 395 to 405 nm UV. The sheet gives no post-cure temperature and no exposure values, pointing instead to Chitubox and Lychee profiles.
Using this specific product
Siraya Tech Blu Nylon Black is listed here as the Nylon-like resin for LCD printers version for 3D printing and tough nylon-like parts. For casting resin, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Nylon-like resin for LCD printers; related versions can use different timing.
- For 3D printing and tough nylon-like parts, pay particular attention to accurate mixing, mold material, mass and room temperature.
- The source gives no conditions for this time.
How to check readiness
Check the casting itself for flex or tack before demolding. The data sheet says to cure with 395 to 405 nm UV light for about 15 minutes.
Avoid this mistake
Demold time is not necessarily full mechanical cure.
Questions
How long should this product be left to cure?
Siraya Tech states: The data sheet says to cure with 395 to 405 nm UV light for about 15 minutes. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
Does the Blu Nylon sheet list print exposure times?
No. It only says to use the slicer profile for your printer, which are available for Chitubox and Lychee. The post-cure is about 15 minutes under UV.
What affects how long this product takes to dry or cure?
UV post-cure depends on lamp output and part shape. Follow the current data sheet. Follow the product label for your conditions.