Sikagard-600
Two-component epoxy coating for floors and walls · US · manufacturer-sourced
How long before you can recoat Sikagard-600?
Short answer
Two-part cure ladder
Pot life, set and full cure all run off the mix time
- Mix the Two-component epoxy coating for floors and walls in the exact ratio
- Work inside the pot life
- Do not load until the stated cure
This product’s stated stages Quoted at 68°F
- Working time ends25 minutes
- Ready for another coat8 hours
- Light foot traffic1 day
- Recoat window closes2 days
- Full cure7 days
Worth noticing: Recoat inside the window: not before 8 hours and not after 2 days.
Common mistake: Mixing a large batch in a warm room; the pot life is shorter than the sheet suggests.
Bond-strength path
Assembly, handling and full load are different stages
Time the epoxy cure
Your countdown
Stated times
- Working time ends25 minutes
- Recoat window closes2 days
- Ready for another coat8 hours
- Light foot traffic1 day
- Full cure7 days
From Sika data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: usa.sika.com
Conditions & fine print
- Stated conditions: 68°F (20°C)
- Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions.
- Temperature range: 50°F to 86°F
- Region US. Formulas can differ between countries; check your container.
- Working time ends: About 50 minutes at 50°F and 15 minutes at 86°F.
- Recoat window closes: 3 days at 50°F and 1 day at 86°F.
- Ready for another coat: 24 hours at 50°F and 6 hours at 86°F.
- Light foot traffic: 36 hours at 50°F and 18 hours at 86°F.
- Full cure: 10 days at 50°F and 5 days at 86°F.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Sika Sikagard-600
- Variant
- Two-component epoxy coating for floors and walls
- Region
- US
- Listed use
- floors, walls
- Timed stages recorded
- tooling, recoat max, recoat min, light foot, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Product data sheet v01.02, March 2020
Condition attached to the stated time: About 50 minutes at 50°F and 15 minutes at 86°F.
About this product
An epoxy coating with a three-temperature table: at 68°F the pot life is 25 minutes, recoat opens at 8 hours and closes at 2 days, foot traffic is 24 hours, light traffic 4 days and full cure 7 days.
Using this specific product
Sika Sikagard-600 is listed here as the Two-component epoxy coating for floors and walls version for floors and walls. For mixing and curing epoxy, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Two-component epoxy coating for floors and walls; related versions can use different timing.
- For floors and walls, pay particular attention to mix ratio, batch size, temperature and pour thickness.
- About 50 minutes at 50°F and 15 minutes at 86°F. 3 days at 50°F and 1 day at 86°F. 24 hours at 50°F and 6 hours at 86°F. 36 hours at 50°F and 18 hours at 86°F. 10 days at 50°F and 5 days at 86°F.
How to check readiness
Check the coolest or thickest part for firmness before sanding, demolding or loading. The sheet gives a pot life of about 25 minutes at 68°F. The sheet gives a maximum recoat wait of 2 days at 68°F. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
A larger batch can heat faster while a thin film may cure more slowly.
Compare with similar products
- Compare with Rust-Oleum EpoxyShield 5300 MAXXRecoat: 1 day there, 8 h here.
- Compare with Dulux Protective Coatings Luxafloor Express FCFRecoat: 2 h there, 8 h here.
Questions
How long before you can recoat this product?
Sika states: The sheet gives a pot life of about 25 minutes at 68°F. Conditions: About 50 minutes at 50°F and 15 minutes at 86°F.. The sheet gives a maximum recoat wait of 2 days at 68°F. Conditions: 3 days at 50°F and 1 day at 86°F.. The sheet gives a minimum recoat wait of 8 hours at 68°F. Conditions: 24 hours at 50°F and 6 hours at 86°F.. The sheet gives foot traffic at about 24 hours at 68°F. Conditions: 36 hours at 50°F and 18 hours at 86°F.. The sheet gives full cure at about 7 days at 68°F. Conditions: 10 days at 50°F and 5 days at 86°F.. These are the manufacturer’s stated times, not a guarantee.
How wide is the Sikagard-600 recoat window?
At 68°F it is 8 hours to 2 days. It is 24 hours to 3 days at 50°F and 6 hours to 1 day at 86°F.
How long does this product take to fully cure?
Sika states: The sheet gives full cure at about 7 days at 68°F. Conditions: 10 days at 50°F and 5 days at 86°F.. These are the manufacturer’s stated times, not a guarantee.
How long do I have to work with this product?
Sika states: The sheet gives a pot life of about 25 minutes at 68°F. Conditions: About 50 minutes at 50°F and 15 minutes at 86°F.. These are the manufacturer’s stated times, not a guarantee.
How long before I can walk on tile set with this product?
Sika states: The sheet gives foot traffic at about 24 hours at 68°F. Conditions: 36 hours at 50°F and 18 hours at 86°F.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions. Follow the product label for your conditions.