Sika

Sikaflex-2c Slope Grade

Two-component self-slumping slope sealant · US · manufacturer-sourced

Check your container: This countdown is for the Two-component self-slumping slope sealant variant. Similar-looking versions may have different times.

How long before Sikaflex-2c Slope Grade can get wet?

Short answer

Water-ready: 3 days after application.
Tack-free: 6–10 hours after application.
Caulk & sealant

Bead cure stages

Skin, tack-free and paint-ready are not the same moment

  1. Gun a continuous bead of Two-component self-slumping slope sealant
  2. Tool it inside the working time
  3. Keep it dry until the stated water-ready time

This product’s stated stages Quoted at 73°F

  • Working time ends4–6 hours
  • Tack-free6–10 hours
  • Water-ready3 days
  • Full cure3 days

Worth noticing: Working time is only 4–6 hours; the next stated stage, tack-free, is 6–10 hours.

Common mistake: Showering or painting at skin-over, when the bead is only crusted on the outside.

Caulk & sealant

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Two-component self-slumping slope sealant version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time the caulk cure

When did you run the bead?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends4–6 hours
  • Tack-free6–10 hours
  • Water-ready3 days
  • Full cure3 days

From Sika data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: usa.sika.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Sealant skin and tack-free times are for a thin film. Deep joints cure from the outside in and take longer. Follow the current data sheet.
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: At 73°F (23°C).
  • Tack-free: At 73°F (23°C).
  • Water-ready: The source gives no conditions for this time.
  • Full cure: At 73°F (23°C).
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Sika Sikaflex-2c Slope Grade
Variant
Two-component self-slumping slope sealant
Region
US
Listed use
slopes, joints
Timed stages recorded
tooling, tack free, water ready, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Product data sheet edition 2.17.2017

Condition attached to the stated time: At 73°F (23°C).

About this product

A two-component sealant on a 2017 sheet: application life 4 to 6 hours, tack-free in 6 to 10 and a 3 day cure before immersion.

Using this specific product

Sika Sikaflex-2c Slope Grade is listed here as the Two-component self-slumping slope sealant version for slopes and joints. For sealing a joint, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Two-component self-slumping slope sealant; related versions can use different timing.
  • For slopes and joints, pay particular attention to joint depth, tooling, ventilation and exposure to water.
  • At 73°F (23°C). The source gives no conditions for this time.

How to check readiness

Probe an inconspicuous edge for a continuous skin and follow the stated water-exposure milestone. The sheet gives an application life of 4 to 6 hours. The sheet gives a tack-free time of 6 to 10 hours. Test the seam or finish at the least-ventilated spot before normal water exposure.

Avoid this mistake

Surface skin is not the same as through-cure, especially in a deep joint.

Compare with similar products

Keep going

Questions

How long before this product can get wet?

Sika states: The sheet gives an application life of 4 to 6 hours. Conditions: At 73°F (23°C).. The sheet gives a tack-free time of 6 to 10 hours. Conditions: At 73°F (23°C).. The sheet says to allow a 3 day cure before total water immersion. Conditions: The source gives no conditions for this time.. The sheet gives a final cure of 3 days. Conditions: At 73°F (23°C).. These are the manufacturer’s stated times, not a guarantee.

When can Slope Grade sit in water?

The sheet says to allow a 3 day cure before total water immersion.

How long does this product take to fully cure?

Sika states: The sheet gives a final cure of 3 days. Conditions: At 73°F (23°C).. These are the manufacturer’s stated times, not a guarantee.

How long do I have to work with this product?

Sika states: The sheet gives an application life of 4 to 6 hours. Conditions: At 73°F (23°C).. These are the manufacturer’s stated times, not a guarantee.

How long until this product is tack-free?

Sika states: The sheet gives a tack-free time of 6 to 10 hours. Conditions: At 73°F (23°C).. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Sealant skin and tack-free times are for a thin film. Deep joints cure from the outside in and take longer. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All caulks and sealants