Henry

925 BES Sealant

Moisture-cure building envelope sealant · US · manufacturer-sourced

Check your container: This countdown is for the Moisture-cure building envelope sealant variant. Similar-looking versions may have different times.

How long does Henry 925 BES Sealant take to dry?

Short answer

Set / hardened: 1 day after application.
Caulk & sealant

Bead cure stages

Skin, tack-free and paint-ready are not the same moment

  1. Gun a continuous bead of Moisture-cure building envelope sealant
  2. Tool it inside the working time
  3. Keep it dry until the stated water-ready time

This product’s stated stages Quoted at 77°F and 50% humidity

  • Working time ends1 hour to 1 hour 30 min
  • Set1 day

Worth noticing: Working time is only 1 hour to 1 hour 30 min; the next stated stage, set, is 1 day.

Common mistake: Showering or painting at skin-over, when the bead is only crusted on the outside.

Caulk & sealant

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Moisture-cure building envelope sealant version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time the caulk cure

When did you run the bead?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends1 hour to 90 minutes
  • Set / hardened1 day

From Henry data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: henry.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • Sealant skin and tack-free times are for a thin film. Deep joints cure from the outside in and take longer. Follow the current data sheet.
  • Temperature range: 10°F to 110°F
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: At 77°F (25°C) and 50% relative humidity.
  • Set / hardened: At 77°F (25°C) and 50% relative humidity.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Henry 925 BES Sealant
Variant
Moisture-cure building envelope sealant
Region
US
Listed use
building envelope sealing
Timed stages recorded
tooling, set
Source checked
2026-10-25

Documentation: Technical data sheet copy · Revision Date 5/22/2023

Condition attached to the stated time: At 77°F (25°C) and 50% relative humidity.

About this product

A building-envelope sealant that works in unusually cold conditions: 10 to 110°F application, with a rule to store it above 35°F for 24 hours before cold-weather use. It sets through in 24 hours, and below 32°F the sheet expects a longer cure.

Using this specific product

Henry 925 BES Sealant is listed here as the Moisture-cure building envelope sealant version for building envelope sealing. For sealing a joint, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Moisture-cure building envelope sealant; related versions can use different timing.
  • For building envelope sealing, pay particular attention to joint depth, tooling, ventilation and exposure to water.
  • At 77°F (25°C) and 50% relative humidity.

How to check readiness

Probe an inconspicuous edge for a continuous skin and follow the stated water-exposure milestone. The data sheet gives an initial set of 60 to 90 minutes, and says to tool before it skins. The data sheet gives a set-through time of 24 hours.

Avoid this mistake

Surface skin is not the same as through-cure, especially in a deep joint.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

Henry states: The data sheet gives an initial set of 60 to 90 minutes, and says to tool before it skins. Conditions: At 77°F (25°C) and 50% relative humidity.. The data sheet gives a set-through time of 24 hours. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

Can Henry 925 BES be installed below freezing?

The sheet allows 10°F to 110°F application, and between 10 and 32°F only on surfaces free of frost or ice. An extended cure is expected below 32°F.

How long do I have to work with this product?

Henry states: The data sheet gives an initial set of 60 to 90 minutes, and says to tool before it skins. Conditions: At 77°F (25°C) and 50% relative humidity.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Sealant skin and tack-free times are for a thin film. Deep joints cure from the outside in and take longer. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All caulks and sealants