Élite Countertop Epoxy
Two-part countertop epoxy, PE700908 (CA) · CA · manufacturer-sourced
How long does Passeport Élite Countertop Epoxy take to dry?
Short answer
Two-part cure ladder
Pot life, set and full cure all run off the mix time
- Mix the Two-part countertop epoxy, PE700908 (CA) in the exact ratio
- Work inside the pot life
- Do not load until the stated cure
This product’s stated stages Quoted at 73°F
- Working time ends1 hour
- Tack-free1 day
- Full cure3 days
Worth noticing: Working time is only 1 hour; the next stated stage, tack-free, is 1 day.
Common mistake: Mixing a large batch in a warm room; the pot life is shorter than the sheet suggests.
Bond-strength path
Assembly, handling and full load are different stages
Time the epoxy cure
Your countdown
Stated times
- Working time ends1 hour
- Tack-free1 day
- Full cure3 days
From Passeport data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: passeportpaint.ca
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions.
- Region CA. Formulas can differ between countries; check your container.
- Working time ends: At 25°C.
- Tack-free: The source gives no conditions for this time.
- Full cure: The source gives no conditions for this time.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Passeport Élite Countertop Epoxy
- Variant
- Two-part countertop epoxy, PE700908 (CA)
- Region
- CA
- Listed use
- countertops, bar tops
- Timed stages recorded
- tooling, tack free, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical sheet 102022
Condition attached to the stated time: At 25°C.
About this product
A Canadian countertop epoxy with a 60 minute pot life, tack-free at 24 hours and full cure at 72 hours.
Using this specific product
Passeport Élite Countertop Epoxy is listed here as the Two-part countertop epoxy, PE700908 (CA) version for countertops and bar tops. For mixing and curing epoxy, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Two-part countertop epoxy, PE700908 (CA); related versions can use different timing.
- For countertops and bar tops, pay particular attention to mix ratio, batch size, temperature and pour thickness.
- At 25°C. The source gives no conditions for this time.
How to check readiness
Check the coolest or thickest part for firmness before sanding, demolding or loading. The sheet gives a pot life of 60 minutes. The sheet gives a tack-free time of 24 hours. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.
Avoid this mistake
A larger batch can heat faster while a thin film may cure more slowly.
Compare with similar products
- Compare with TotalBoat Penetrating EpoxyTack-free: 1.5–2 days there, 1 day here.
- Compare with Sikadur-33Tack-free: 25–30 min there, 1 day here.
Questions
How long does this product take to dry?
Passeport states: The sheet gives a pot life of 60 minutes. Conditions: At 25°C.. The sheet gives a tack-free time of 24 hours. Conditions: The source gives no conditions for this time.. The sheet gives full cure at 72 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How does this differ from Stone Coat Countertop Epoxy?
Its cure is 72 hours against days to weeks for the Stone Coat range.
How long does this product take to fully cure?
Passeport states: The sheet gives full cure at 72 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
How long do I have to work with this product?
Passeport states: The sheet gives a pot life of 60 minutes. Conditions: At 25°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions. Follow the product label for your conditions.