CONAP

MR-5012

Mold release (solvent) · US · manufacturer-sourced

Check your container: This countdown is for the Mold release (solvent) variant. Similar-looking versions may have different times.

How long does CONAP MR-5012 take to dry?

Short answer

Fully dry: 10–15 minutes after application.
Mold release agents

Release-and-cast plan

Let the release dry before the pour

  1. Apply the Mold release (solvent) in thin coats
  2. Let it flash or dry as stated
  3. Pour or mold after the stated wait

This product’s stated stages Quoted at 73°F

  • Fully dry10–15 minutes

Worth noticing: The manufacturer states only one timing here (fully dry, 10–15 minutes); nothing else is inferred.

Common mistake: Pouring onto a release film that is still wet; surface defects result.

Mold release agents

Project stage ladder

Demolding, handling, finishing and final use may occur at different times

ShapeSetFinishUse

For urethane casting and potting molds, identify which stage the stated dry 10–15 minutes milestone actually unlocks. Earlier handling does not prove final cure.

Time the release

When did you apply the release?
Conditions that affect drying
Where?
Thickness

Stated times

  • Fully dry10–15 minutes

From CONAP data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: chemical-concepts.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
  • Region US. Formulas can differ between countries; check your container.
  • Fully dry: Or bake 5 minutes at 60°C (140°F).
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
CONAP MR-5012
Variant
Mold release (solvent)
Region
US
Listed use
urethane casting, potting molds
Timed stages recorded
full dry
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet R00, 02/20/18

Condition attached to the stated time: Or bake 5 minutes at 60°C (140°F).

About this product

A release agent applied after each demold. It air-dries in 10 to 15 minutes, or bakes in 5 at 60°C, and the dry film can be buffed for finish.

Using this specific product

CONAP MR-5012 is listed here as the Mold release (solvent) version for urethane casting and potting molds. For conditioning a mold, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Mold release (solvent); related versions can use different timing.
  • For urethane casting and potting molds, pay particular attention to mold material, coat count, cure between coats and mold temperature.
  • Or bake 5 minutes at 60°C (140°F).

How to check readiness

Follow the coat-by-coat schedule and the cure time before molding. The sheet says to air dry 10 to 15 minutes after draining the excess.

Avoid this mistake

A new or repaired mold may need a long conditioning period before production.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

CONAP states: The sheet says to air dry 10 to 15 minutes after draining the excess. Conditions: Or bake 5 minutes at 60°C (140°F).. These are the manufacturer’s stated times, not a guarantee.

How long does CONAP MR-5012 take to dry?

The sheet gives 10 to 15 minutes, or 5 minutes at 60°C.

What affects how long this product takes to dry or cure?

Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All mold release agents