Cabot

Cabot Solid Color Oil Decking Stain 7600

Oil-based solid color deck stain · US · manufacturer-sourced

Check your container: This countdown is for the Oil-based solid color deck stain variant. Similar-looking versions may have different times.

How long does Cabot Solid Color Oil Decking Stain 7600 take to dry?

Short answer

Fully dry: 8 hours after application.
Wood finish

Finish build-up

Dry to the touch is not ready for furniture

  1. Wipe or brush the Oil-based solid color deck stain thin with the grain
  2. Scuff lightly only after the recoat time
  3. Wait out full cure before heavy use

This product’s stated stages Quoted at 73°F

  • Fully dry8 hours
  • Recoat window closes2 days

Worth noticing: Fully dry at 8 hours; recoat window closes at 2 days.

Common mistake: Setting a drink or a lamp on a finish that is dry but not cured; rings and prints stay.

Wood finish

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Oil-based solid color deck stain directions and prepare for deck, wood decking, and porch.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Plan the next finish coat

When did you wipe on this coat?
Conditions that affect drying
Where?
Thickness

Stated times

  • Recoat window closes2 days
  • Fully dry8 hours

From Cabot data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: cabotstain.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. This is a 2008 data sheet. Check the label on the can.
  • Region US. Formulas can differ between countries; check your container.
  • Recoat window closes: The source gives no conditions for this time.
  • Fully dry: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Cabot Cabot Solid Color Oil Decking Stain 7600
Variant
Oil-based solid color deck stain
Region
US
Listed use
deck, wood decking, porch
Timed stages recorded
recoat max, full dry
Source checked
2026-10-25

Documentation: Technical data sheet copy · Data sheet no. 65-7600, 7/08

Condition attached to the stated time: The source gives no conditions for this time.

About this product

An oil-based solid color stain for decks. The numbers that matter on its 2008 data sheet are a dry time of about 8 hours and a second-coat window that closes at 48 hours, which is tighter than most water-based deck stains.

Using this specific product

Cabot Cabot Solid Color Oil Decking Stain 7600 is listed here as the Oil-based solid color deck stain version for deck, wood decking, and porch. For finishing wood, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Oil-based solid color deck stain; related versions can use different timing.
  • For deck, wood decking, and porch, pay particular attention to bare-wood preparation, coat thickness and room airflow.
  • The source gives no conditions for this time.

How to check readiness

Check a hidden area for tack, odor and marking before handling or use. The data sheet says a second coat should go on within 48 hours. The data sheet gives about 8 hours to dry.

Avoid this mistake

Cool, humid rooms and heavy coats can extend the usable wait substantially.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

Cabot states: The data sheet says a second coat should go on within 48 hours. Conditions: The source gives no conditions for this time.. The data sheet gives about 8 hours to dry. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What happens if I miss the 48 hour second-coat window on Cabot 7600?

The data sheet only gives the window: a second coat within 48 hours. It does not say what to do after that, so ask Cabot or follow the product label before recoating a cured first coat.

What affects how long this product takes to dry or cure?

Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. This is a 2008 data sheet. Check the label on the can. Follow the product label for your conditions.

Similar products

All wood finishes