Titebond (Franklin International)

Speed Set Wood Glue

Fast-setting · US · not yet reviewed

Short answer

Clamps can come off: 15 minutes after application.
Working time ends: 2–4 minutes after application.

Start the clock

When did you apply it?
Outdoors, temperature
Where?
Thickness

Stated times

  • Working time ends2–4 minutes
  • Clamps can come off15 minutes

From Titebond (Franklin International) product page · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.

Conditions & fine print
  • Stated conditions: 70°F, 50% RH, 8% wood moisture
  • Open assembly time is only 2–4 minutes, so clamp quickly. The page gives no full cure time.
  • Temperature range: 59°F to —°F
  • Region US. Formulas can differ between countries; check your container.
  • Working time ends: 70°F, 50% RH
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Questions

How long should Speed Set Wood Glue be clamped?

Titebond (Franklin International) states: Minimum clamp time is 15 minutes. This is the manufacturer’s stated time, not a guarantee.

How long is the working time for Speed Set Wood Glue?

Titebond (Franklin International) states: Open assembly time: 2–4 minutes (70°F / 50% RH / 8% MC). Conditions: 70°F, 50% RH. This is the manufacturer’s stated time, not a guarantee.

Similar products

All adhesives and glues