EpoxAmite 101 Fast
Laminating epoxy · US · manufacturer-sourced
How long before you can demold Smooth-On EpoxAmite 101 Fast?
Short answer
Two-part cure ladder
Pot life, set and full cure all run off the mix time
- Mix the Laminating epoxy in the exact ratio
- Work inside the pot life
- Do not load until the stated cure
This product’s stated stages Quoted at 73°F
- Working time ends11 minutes
- Demold6–8 hours
Worth noticing: Working time is only 11 minutes; the next stated stage, demold, is 6–8 hours.
Common mistake: Mixing a large batch in a warm room; the pot life is shorter than the sheet suggests.
Bond-strength path
Assembly, handling and full load are different stages
Time the epoxy cure
Your countdown
Stated times
- Working time ends11 minutes
- Ready to demold6–8 hours
From Smooth-On data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: smooth-on.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Pot life and cure time shorten in warm rooms and with bigger batches. Follow the current technical bulletin for mix ratio, mixing and release agents. The chart is a summary.
- Region US. Formulas can differ between countries; check your container.
- Working time ends: At 73°F (23°C); pot life by ASTM D-2471.
- Ready to demold: At 73°F (23°C).
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Smooth-On EpoxAmite 101 Fast
- Variant
- Laminating epoxy
- Region
- US
- Listed use
- laminating, fiberglass layup, coating
- Timed stages recorded
- tooling, demold
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Technical Data Chart (no revision date)
Condition attached to the stated time: At 73°F (23°C); pot life by ASTM D-2471.
About this product
EpoxAmite 101 Fast is a laminating epoxy on Smooth-On's chart with the shortest pot life of the six EpoxAmite rows. The chart also lists a thin-film working time of 30 minutes, far longer than the pot life because a thin film sheds the heat that shortens a deep mix.
Using this specific product
Smooth-On EpoxAmite 101 Fast is listed here as the Laminating epoxy version for laminating, fiberglass layup, and coating. For mixing and curing epoxy, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Laminating epoxy; related versions can use different timing.
- For laminating, fiberglass layup, and coating, pay particular attention to mix ratio, batch size, temperature and pour thickness.
- At 73°F (23°C); pot life by ASTM D-2471. At 73°F (23°C).
How to check readiness
Check the coolest or thickest part for firmness before sanding, demolding or loading. The technical data chart gives a pot life of 11 minutes. Flex the mold away at one edge and stop if the casting bends, tears or remains tacky.
Avoid this mistake
A larger batch can heat faster while a thin film may cure more slowly.
Questions
How long before you can demold this product?
Smooth-On states: The technical data chart gives a pot life of 11 minutes. Conditions: At 73°F (23°C); pot life by ASTM D-2471.. The technical data chart gives a cure time of 6 to 8 hours. Conditions: At 73°F (23°C).. These are the manufacturer’s stated times, not a guarantee.
Why is the thin-film working time of EpoxAmite 101 Fast longer than its pot life?
The chart lists a pot life of 11 minutes (ASTM D-2471 mass test) and a thin-film working time of 30 minutes. A thin film spreads the heat that a mass holds, so it stays workable longer. Cure is 6 to 8 hours at 73°F.
How does EpoxAmite 101 Fast compare with the rest of the EpoxAmite line?
Its cure time is 6 to 8 hours at 73°F. Across the six rows the cure runs from 6 to 8 hours (101 Fast) up to 24 hours (103 Slow, HT and White 102).
How long do I have to work with this product?
Smooth-On states: The technical data chart gives a pot life of 11 minutes. Conditions: At 73°F (23°C); pot life by ASTM D-2471.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Pot life and cure time shorten in warm rooms and with bigger batches. Follow the current technical bulletin for mix ratio, mixing and release agents. The chart is a summary. Follow the product label for your conditions.