Sherwin-Williams

Emerald Interior Acrylic Latex Paint (K37 Satin)

Satin · US · not yet reviewed

Check your container: This countdown is for the Satin variant. Similar-looking versions may have different times.

How long before recoating Sherwin-Williams Emerald Interior Acrylic Latex Paint (K37 Satin)?

Short answer

Ready for another coat: 4 hours after application.
Safe to touch: 1 hour after application.
Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the Satin directions and prepare for walls, trim, and doors.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Calculate the next coating step

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch1 hour
  • Ready for another coat4 hours

From Sherwin-Williams data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: sherwin-williams.com

Conditions & fine print
  • Stated conditions: 77°F and 50% relative humidity
  • Drying and recoat times depend on temperature, humidity and film thickness. Apply above 50°F.
  • Temperature range: 50°F to —°F
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: 77°F and 50% RH
  • Ready for another coat: 77°F and 50% RH
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

Sherwin-Williams Emerald Interior Acrylic Latex Paint (K37 Satin) is listed here as the Satin version for walls, trim, and doors. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Satin; related versions can use different timing.
  • For walls, trim, and doors, pay particular attention to surface preparation, coat thickness and ventilation.
  • 77°F and 50% RH.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Questions

How long does this product take to dry?

Sherwin-Williams states: Drying time, recoat: 4 hours. Conditions: 77°F and 50% RH. Drying time, touch: 1 hour. Conditions: 77°F and 50% RH. These are the manufacturer’s stated times, not a guarantee.

How long should I wait between coats of this product?

Sherwin-Williams states: Drying time, recoat: 4 hours. Conditions: 77°F and 50% RH. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch or handle?

Sherwin-Williams states: Drying time, touch: 1 hour. Conditions: 77°F and 50% RH. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Drying and recoat times depend on temperature, humidity and film thickness. Apply above 50°F. Application temperature: 50°F to —°F. Follow the product label for your conditions.

Similar products

All paints, primers and patching