Scotts

Turf Builder Weed & Feed

Granular lawn product · US · manufacturer-sourced

Check your container: This countdown is for the Granular lawn product variant. Similar-looking versions may have different times.

How long before Scotts Turf Builder Weed & Feed can get wet?

Short answer

Water-ready: 1 day after application.
Lawn and garden treatments

Application-and-reentry plan

Rainfast time and re-entry time answer different questions

  1. Apply the Granular lawn product per the label
  2. Keep people and pets out for the stated time
  3. Hold off watering or mowing until the label says

This product’s stated stages

  • Normal use1 day
  • Water-ready1 day

Worth noticing: Normal use at 1 day; water-ready at 1 day.

Common mistake: Treating rainfast time as re-entry time.

Lawn and garden treatments

Treatment safety gate

Elapsed time is only one condition for the next action

Time alone does not clear the next step

Rainfast time is not people/pet re-entry time. Follow the current label for each question separately.

Exact version
Granular lawn product
Intended use
lawn, weed control, and fertilizer

Time re-entry and rainfast

When did you apply it?

Stated times

  • Normal use1 day
  • Water-ready1 day

From Scotts product page · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: scottsmiraclegro.com

Conditions & fine print
  • Stated conditions: Not stated by the manufacturer
  • Apply when weeds are actively growing and daytime temperatures are consistently 60 to 90°F, and when no rain is expected the next day. A month or more may be needed for complete control. Keep people and pets off until dusts have settled. Follow the current label.
  • Temperature range: 60°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Normal use: The source gives no conditions for this time.
  • Water-ready: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Scotts Turf Builder Weed & Feed
Variant
Granular lawn product
Region
US
Listed use
lawn, weed control, fertilizer
Timed stages recorded
normal use, water ready
Source checked
2026-10-25

Documentation: Official product page · Manufacturer page; checked 2026-10-26

Condition attached to the stated time: The source gives no conditions for this time.

About this product

Turf Builder Weed & Feed is a lawn and garden treatments product from Scotts, listed for lawn, weed control, fertilizer. Its times are stated under: The source gives no conditions for this time.

Using this specific product

Scotts Turf Builder Weed & Feed is listed here as the Granular lawn product version for lawn, weed control, and fertilizer. For treating a lawn or garden area, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Granular lawn product; related versions can use different timing.
  • For lawn, weed control, and fertilizer, pay particular attention to wind, dry foliage, application rate and forecast.
  • The source gives no conditions for this time.

How to check readiness

Use the rainfast claim only for rain; use the label separately for people and pet re-entry. Let the lawn rest for at least 24 hours after you apply before mowing. Test the seam or finish at the least-ventilated spot before normal water exposure.

Avoid this mistake

Rainfast does not mean dry, harmless or ready for people and pets.

Keep going

Questions

How long before this product can get wet?

Scotts states: Let the lawn rest for at least 24 hours after you apply before mowing. Conditions: The source gives no conditions for this time.. Hold off on watering for at least 24 hours after you apply. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What conditions do the stated times for Turf Builder Weed & Feed assume?

Stated conditions: The source gives no conditions for this time. Application temperature: 60 to 90°F. Cooler, damper or thicker applications usually take longer.

Is there a faster Scotts lawn and garden treatments option?

This is the quickest of the 2 Scotts lawn and garden treatments products listed here for water-ready (1 day).

What affects how long this product takes to dry or cure?

Apply when weeds are actively growing and daytime temperatures are consistently 60 to 90°F, and when no rain is expected the next day. A month or more may be needed for complete control. Keep people and pets off until dusts have settled. Follow the current label. Follow the product label for your conditions.

Similar products

All lawn and garden treatments