Rust-Oleum

Painter's Touch Ultra Cover 2X Enamel (Brush-On)

Water-based gloss / satin / flat · US · not yet reviewed

Short answer

Ready for another coat: 2–4 hours after application.
Safe to touch: 30 minutes after application.

Start the clock

When did you apply it?
Outdoors, temperature
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Safe to handle1 hour
  • Ready for another coat2–4 hours
  • Fully dry2–4 hours

From Rust-Oleum data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.

Conditions & fine print
  • Stated conditions: 70°F and 50% relative humidity
  • Times are for the water-based colors; the solvent-based metallics take much longer (recoat after 24 hours). Apply below 65% humidity.
  • Temperature range: 50°F to 90°F
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: 70°F and 50% RH
  • Safe to handle: 70°F and 50% RH
  • Ready for another coat: 70°F and 50% RH; water-based colors
  • Fully dry: 70°F and 50% RH; water-based colors
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Questions

How long before Painter's Touch Ultra Cover 2X Enamel (Brush-On) is ready for another coat?

Rust-Oleum states: Recoat: 2–4 hours. Conditions: 70°F and 50% RH; water-based colors. This is the manufacturer’s stated time, not a guarantee.

How long before Painter's Touch Ultra Cover 2X Enamel (Brush-On) is safe to touch?

Rust-Oleum states: Dries to touch in 30 minutes. Conditions: 70°F and 50% RH. This is the manufacturer’s stated time, not a guarantee.

Similar products

All paints, primers and patching