Specialty Appliance Epoxy Spray
Spray (all colors) · US · not yet reviewed
Short answer
Recoat window closes: 30 minutes after application.
Ready for another coat: 7 days after application.
Start the clock
Your countdown
Stated times
- Recoat window closes30 minutes
- Tack-free2–4 hours
- Safe to handle5–9 hours
- Ready for another coat7 days
From Rust-Oleum data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.
Conditions & fine print
- Stated conditions: 70°F and 50% relative humidity
- Recoat within 30 minutes or after 1 week; recoating in between can cause problems. Apply below 85% humidity.
- Temperature range: 50°F to 90°F
- Region US. Formulas can differ between countries; check your container.
- Recoat window closes: 70–80°F and 50% RH
- Tack-free: 70–80°F and 50% RH
- Safe to handle: 70–80°F and 50% RH
- Ready for another coat: 70–80°F and 50% RH
- Entered from the manufacturer source; second review pending. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Questions
How long is the recoat window for Specialty Appliance Epoxy Spray?
Rust-Oleum states: Recoat within 30 minutes or after 1 week. Conditions: 70–80°F and 50% RH. This is the manufacturer’s stated time, not a guarantee.
How long before Specialty Appliance Epoxy Spray is ready for another coat?
Rust-Oleum states: If you miss the 30-minute window, wait 1 week to recoat. Conditions: 70–80°F and 50% RH. This is the manufacturer’s stated time, not a guarantee.