Permatex

Ultra Blue RTV Silicone Gasket Maker

Blue RTV silicone (all sizes) · US · not yet reviewed

Check your container: This countdown is for the Blue RTV silicone (all sizes) variant. Similar-looking versions may have different times.

How long does Permatex Ultra Blue RTV Silicone Gasket Maker take to dry?

Short answer

Tack-free: 2 hours after application.
Full cure: 1 day after application.
Confirm the gasket is firm and fully skinned before adding fluids or running the engine.
Used for automotive parts and fasteners: elapsed time alone can’t confirm it’s ready. Inspect or test before loading.
Gasket makers

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Blue RTV silicone (all sizes) version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Calculate bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Tack-free2 hours
  • Full cure1 day

From Permatex data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: permatex.com

Conditions & fine print
  • Stated conditions: 77°F (25°C)
  • Permatex says cure times vary with temperature, humidity and gap size, and gives no correction factor. For best results let the gasket cure overnight. The data sheet gives no wait time before adding fluids or starting the engine; follow the product label and the vehicle service manual.
  • Region US. Formulas can differ between countries; check your container.
  • Tack-free: Cure times vary with temperature, humidity and gap.
  • Full cure: Cure times vary with temperature, humidity and gap.
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

Permatex Ultra Blue RTV Silicone Gasket Maker is listed here as the Blue RTV silicone (all sizes) version for gasket, engine, and oil pan. For using this product, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Blue RTV silicone (all sizes); related versions can use different timing.
  • For gasket, engine, and oil pan, pay particular attention to the exact variant, preparation and environmental conditions.
  • Cure times vary with temperature, humidity and gap.

How to check readiness

Check the real material or treated area at the slowest location before the next step. Confirm the gasket is firm and fully skinned before adding fluids or running the engine. The product dries tack free in two hours. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

The first visible change is not always the manufacturer’s final-use milestone.

Questions

How long does this product take to dry?

Permatex states: The product dries tack free in two hours. Conditions: Cure times vary with temperature, humidity and gap.. The product fully cures in 24 hours. Conditions: Cure times vary with temperature, humidity and gap.. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to fully cure?

Permatex states: The product fully cures in 24 hours. Conditions: Cure times vary with temperature, humidity and gap.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Permatex says cure times vary with temperature, humidity and gap size, and gives no correction factor. For best results let the gasket cure overnight. The data sheet gives no wait time before adding fluids or starting the engine; follow the product label and the vehicle service manual. Follow the product label for your conditions.

Similar products

All gasket makers