MORE

Premium Stone Sealer

Penetrating stone sealer · US · manufacturer-sourced

Check your container: This countdown is for the Penetrating stone sealer variant. Similar-looking versions may have different times.

How long before you can walk on MORE Premium Stone Sealer?

Short answer

Light foot traffic: 6 hours after application.
Full cure: 1 day after application.
Masonry cleaners, sealers and water repellents

Masonry treatment plan

Rain-ready, dry and fully cured are different checkpoints

  1. Clean and dry the surface
  2. Apply the Penetrating stone sealer
  3. Keep it dry through the stated rain-free period

This product’s stated stages Quoted at 73°F

  • Light foot traffic6 hours
  • Full cure1 day

Worth noticing: Light foot traffic at 6 hours; full cure at 1 day.

Common mistake: Treating a damp wall; the moisture traps and the product will not cure properly.

Masonry cleaners, sealers and water repellents

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Time the masonry treatment

When did you treat the masonry?
Conditions that affect drying
Where?
Thickness

Stated times

  • Light foot traffic6 hours
  • Full cure1 day

From MORE data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: None

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Water-repellent and sealer times depend on surface temperature, porosity and humidity. Follow the current data sheet.
  • Temperature range: 50°F to 80°F
  • Region US. Formulas can differ between countries; check your container.
  • Light foot traffic: Surface temperature should be 50 to 80°F.
  • Full cure: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
MORE Premium Stone Sealer
Variant
Penetrating stone sealer
Region
US
Listed use
natural stone, granite, countertops
Timed stages recorded
light foot, full cure
Source checked
2026-10-25

Documentation: Technical data sheet copy · Data sheet code 6212015, copyright 2015

Condition attached to the stated time: Surface temperature should be 50 to 80°F.

About this product

A stone sealer from a small brand whose data sheet is hosted by a stone distributor. It lets the sealer penetrate for 15 minutes before the unabsorbed excess is removed, then gives 6 hours to foot traffic and a 24 hour cure.

Using this specific product

MORE Premium Stone Sealer is listed here as the Penetrating stone sealer version for natural stone, granite, and countertops. For cleaning or sealing masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Penetrating stone sealer; related versions can use different timing.
  • For natural stone, granite, and countertops, pay particular attention to surface porosity, temperature, moisture in the substrate and rain forecast.
  • Surface temperature should be 50 to 80°F. The source gives no conditions for this time.

How to check readiness

Test a small area and watch for the stated rain-free and cure times. Try a protected edge first and avoid turning, dragging or concentrated loads. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

A dry-looking surface can still be taking up a sealer or repellent.

Keep going

Questions

How long before you can walk on this product?

MORE states: The data sheet lists foot traffic 6 hours after the final application. Conditions: Surface temperature should be 50 to 80°F.. The data sheet lists a cure time of 24 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What does MORE Premium Stone Sealer do after 15 minutes?

The sheet says to remove all sealer that has not absorbed into the surface. Foot traffic is allowed 6 hours after the final application and the cure time is listed as 24 hours.

How long does this product take to fully cure?

MORE states: The data sheet lists a cure time of 24 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Water-repellent and sealer times depend on surface temperature, porosity and humidity. Follow the current data sheet. Follow the product label for your conditions.

Similar products

All masonry cleaners, sealers and water repellents