Leather Repair Basecoat Charcoal Grey
Water-based leather repair color · US · manufacturer-sourced
How long before you can recoat Mohawk Finishing Leather Repair Basecoat Charcoal Grey?
Short answer
Repair-and-wear plan
Hold the repair, then wait before wearing
- Clean and roughen the surfaces
- Apply and press the Water-based leather repair color repair
- Wear only after the stated cure
This product’s stated stages Quoted at 77°F
- Ready for another coat8 minutes
- Safe to touch15 minutes
Worth noticing: Ready for another coat at 8 minutes; safe to touch at 15 minutes.
Common mistake: Walking out in a repaired shoe once it feels stuck; flexing breaks the bond.
Bond-strength path
Assembly, handling and full load are different stages
Time the repair
Your countdown
Stated times
- Safe to touch15 minutes
- Ready for another coat8 minutes
From Mohawk Finishing data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: mohawk-finishing.com
Conditions & fine print
- Stated conditions: 77°F (25°C)
- Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label.
- Region US. Formulas can differ between countries; check your container.
- Safe to touch: The source gives no conditions for this time.
- Ready for another coat: Same 77°F and 45% humidity.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Mohawk Finishing Leather Repair Basecoat Charcoal Grey
- Variant
- Water-based leather repair color
- Region
- US
- Listed use
- leather repair, color matching
- Timed stages recorded
- touch, recoat min
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Product data sheet 109-3016, undated
Condition attached to the stated time: The source gives no conditions for this time.
About this product
A leather repair color with a very fast cycle: 15 minutes to air dry and only 8 minutes between coats. That makes it a build-up-in-thin-layers product rather than a one-coat wait.
Using this specific product
Mohawk Finishing Leather Repair Basecoat Charcoal Grey is listed here as the Water-based leather repair color version for leather repair and color matching. For using this product, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Water-based leather repair color; related versions can use different timing.
- For leather repair and color matching, pay particular attention to the exact variant, preparation and environmental conditions.
- The source gives no conditions for this time. Same 77°F and 45% humidity.
How to check readiness
Check the real material or treated area at the slowest location before the next step. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required.
Avoid this mistake
The first visible change is not always the manufacturer’s final-use milestone.
Compare with similar products
- Compare with Angelus Acrylic Leather PaintRecoat: 15–30 min there, 8 min here.
- Compare with Angelus Metallic Acrylic Leather PaintRecoat: 15–30 min there, 8 min here.
Questions
How long before you can recoat this product?
Mohawk Finishing states: The sheet gives air dry in 15 minutes at 77°F and 45% humidity. Conditions: The source gives no conditions for this time.. The sheet gives 8 minutes between coats. Conditions: Same 77°F and 45% humidity.. These are the manufacturer’s stated times, not a guarantee.
How long between coats of Mohawk Leather Repair Basecoat?
The sheet gives 8 minutes between coats and 15 minutes to air dry at 77°F and 45% humidity.
How long until this product is safe to touch?
Mohawk Finishing states: The sheet gives air dry in 15 minutes at 77°F and 45% humidity. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Dry and recoat times change with temperature, humidity and film build. Follow the current data sheet and label. Follow the product label for your conditions.