EP29LP
Long pot life two-part epoxy · US · manufacturer-sourced
How long does Master Bond EP29LP take to cure?
Short answer
Two-part cure ladder
Pot life, set and full cure all run off the mix time
- Mix the Long pot life two-part epoxy in the exact ratio
- Work inside the pot life
- Do not load until the stated cure
This product’s stated stages Quoted at 73°F
- Working time ends6 hours
- Full cure5–7 days
Worth noticing: Working time is only 6 hours; the next stated stage, full cure, is 5–7 days.
Common mistake: Mixing a large batch in a warm room; the pot life is shorter than the sheet suggests.
Bond-strength path
Assembly, handling and full load are different stages
Time the epoxy cure
Your countdown
Stated times
- Working time ends6 hours
- Full cure5–7 days
From Master Bond data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: masterbond.com
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions.
- Region US. Formulas can differ between countries; check your container.
- Working time ends: The guide's set-up time column is used for this time. Confirm working life on the product's own data sheet.
- Full cure: At room temperature.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Master Bond EP29LP
- Variant
- Long pot life two-part epoxy
- Region
- US
- Listed use
- large castings, potting, slow-cure bonding
- Timed stages recorded
- tooling, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet · Selector guide, undated
Condition attached to the stated time: The guide's set-up time column is used for this time. Confirm working life on the product's own data sheet.
About this product
A long working-time epoxy with a set-up time of more than 6 hours and a cure of 5 to 7 days at room temperature. The guide lists a 4 to 6 hour heat cure at 200°F for a faster finish.
Using this specific product
Master Bond EP29LP is listed here as the Long pot life two-part epoxy version for large castings, potting, and slow-cure bonding. For mixing and curing epoxy, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Long pot life two-part epoxy; related versions can use different timing.
- For large castings, potting, and slow-cure bonding, pay particular attention to mix ratio, batch size, temperature and pour thickness.
- The guide's set-up time column is used for this time. Confirm working life on the product's own data sheet. At room temperature.
How to check readiness
Check the coolest or thickest part for firmness before sanding, demolding or loading. The selector guide lists a set-up time of more than 6 hours at room temperature. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.
Avoid this mistake
A larger batch can heat faster while a thin film may cure more slowly.
Compare with similar products
- Compare with MAS FLAG Resin with Slow HardenerFull cure: 5 days there, 5–7 days here.
- Compare with Loctite (Henkel) EA 3430 Epoxy AdhesiveFull cure: 7 days there, 5–7 days here.
Questions
How long does this product take to cure?
Master Bond states: The selector guide lists a set-up time of more than 6 hours at room temperature. Conditions: The guide's set-up time column is used for this time. Confirm working life on the product's own data sheet.. The selector guide lists a room-temperature cure of 120 to 168 hours. Conditions: At room temperature.. These are the manufacturer’s stated times, not a guarantee.
Why is EP29LP's cure measured in days?
The guide lists 5 to 7 days at room temperature, because it is built for a set-up time of more than 6 hours. Heat cure at 200°F takes 4 to 6 hours.
How long do I have to work with this product?
Master Bond states: The selector guide lists a set-up time of more than 6 hours at room temperature. Conditions: The guide's set-up time column is used for this time. Confirm working life on the product's own data sheet.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Pot life and cure times shorten in warm rooms and with larger batches. Follow the current data sheet and mixing instructions. Follow the product label for your conditions.