INSL-X (Benjamin Moore)

Stix Waterborne Bonding Primer (SXA-110)

White / tintable · US · not yet reviewed

Check your container: This countdown is for the White / tintable variant. Similar-looking versions may have different times.

How long before you can paint over INSL-X (Benjamin Moore) Stix Waterborne Bonding Primer (SXA-110)?

Short answer

Paint-ready: 3–4 hours after application.
Safe to touch: 30 minutes after application.
Paint, primer & patch

Coat timeline

Plan the next coat and final use separately

  1. 1
    ApplyUse the White / tintable directions and prepare for glossy surfaces, tile, and laminate.
  2. 2
    Next coatUse the listed recoat milestone; do not substitute touch-dry time.
  3. 3
    Normal useWait for the applicable handling, water or cure milestone.

Calculate the next coating step

When did this coat go on?
Conditions that affect drying
Where?
Thickness

Stated times

  • Safe to touch30 minutes
  • Paint-ready3–4 hours
  • Full cure3–4 days

From INSL-X (Benjamin Moore) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: benjaminmoore.com

Conditions & fine print
  • Stated conditions: 77°F (25°C) and 50% relative humidity
  • High humidity and cool temperatures lengthen dry, recoat and service times. Do not apply when surface, air or product temperature is below 35°F.
  • Temperature range: 35°F to —°F
  • Region US. Formulas can differ between countries; check your container.
  • Safe to touch: 77°F and 50% RH
  • Paint-ready: 77°F and 50% RH
  • Full cure: Maximum scrape resistance
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

INSL-X (Benjamin Moore) Stix Waterborne Bonding Primer (SXA-110) is listed here as the White / tintable version for glossy surfaces, tile, and laminate. For painting, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says White / tintable; related versions can use different timing.
  • For glossy surfaces, tile, and laminate, pay particular attention to surface preparation, coat thickness and ventilation.
  • 77°F and 50% RH. Maximum scrape resistance.

How to check readiness

Test an inconspicuous area for firmness and blocking before normal use. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. To recoat: 3–4 hours; can be topcoated with latex or oil-based finishes. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Recoating too early can trap solvent or water; waiting much longer may require scuffing under the label directions.

Questions

How long does this product take to dry?

INSL-X (Benjamin Moore) states: To recoat: 3–4 hours; can be topcoated with latex or oil-based finishes. Conditions: 77°F and 50% RH. Dry to touch: 30 minutes. Conditions: 77°F and 50% RH. Allow Stix to cure for approximately 3 to 4 days to achieve maximum resistance to scrape off. Conditions: Maximum scrape resistance. These are the manufacturer’s stated times, not a guarantee.

How long until I can paint over this product?

INSL-X (Benjamin Moore) states: To recoat: 3–4 hours; can be topcoated with latex or oil-based finishes. Conditions: 77°F and 50% RH. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to fully cure?

INSL-X (Benjamin Moore) states: Allow Stix to cure for approximately 3 to 4 days to achieve maximum resistance to scrape off. Conditions: Maximum scrape resistance. These are the manufacturer’s stated times, not a guarantee.

How long until this product is safe to touch or handle?

INSL-X (Benjamin Moore) states: Dry to touch: 30 minutes. Conditions: 77°F and 50% RH. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

High humidity and cool temperatures lengthen dry, recoat and service times. Do not apply when surface, air or product temperature is below 35°F. Application temperature: 35°F to —°F. Follow the product label for your conditions.

Similar products

All paints, primers and patching