Everbuild (Sika)

Mirror Mate

Mirror-safe adhesive (UK) · GB · manufacturer-sourced

Check your container: This countdown is for the Mirror-safe adhesive (UK) variant. Similar-looking versions may have different times.

How long does Everbuild (Sika) Mirror Mate take to dry?

Short answer

Tack-free: 10 minutes after application.
Full cure: 1–2 days after application.
Adhesive & glue

Bond-strength path

Hold, handle and full load come at different times

  1. Join the parts with the Mirror-safe adhesive (UK)
  2. Hold or clamp for the set time
  3. Put load on the bond only at full strength

This product’s stated stages Quoted at 73°F

  • Tack-free10 minutes
  • Remove supports1–2 days
  • Full cure1–2 days

Worth noticing: Tack-free at 10 minutes; full cure at 1–2 days.

Common mistake: Releasing the clamps because the glue line feels firm, long before it can carry a load.

Adhesive & glue

Bond-strength path

Assembly, handling and full load are different stages

1 · AssembleClean, fit and apply the Mirror-safe adhesive (UK) version correctly.
2 · HoldKeep the joint undisturbed through its set or clamp stage.
3 · LoadUse full cure—not surface firmness—before demanding use.

Time bond readiness

When was the bond assembled?
Conditions that affect drying
Where?
Thickness

Stated times

  • Tack-free10 minutes
  • Temporary support can come off1–2 days
  • Full cure1–2 days

From Everbuild (Sika) data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: everbuild.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
  • Apply at 41°F or above
  • Region GB. Formulas can differ between countries; check your container.
  • Tack-free: At 20°C.
  • Temporary support can come off: The source gives no conditions for this time.
  • Full cure: About 1 mm per 24 hours.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Everbuild (Sika) Mirror Mate
Variant
Mirror-safe adhesive (UK)
Region
GB
Listed use
mirrors, glass
Timed stages recorded
tack free, support removal, full cure
Source checked
2026-10-25

Documentation: Technical data sheet · Data sheet v01.01, Feb 2018

Condition attached to the stated time: At 20°C.

About this product

A mirror adhesive that tacks in 10 minutes but needs the mirror supported for 24 to 48 hours.

Using this specific product

Everbuild (Sika) Mirror Mate is listed here as the Mirror-safe adhesive (UK) version for mirrors and glass. For bonding parts, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Mirror-safe adhesive (UK); related versions can use different timing.
  • For mirrors and glass, pay particular attention to surface fit, cleanliness, clamping pressure and bond-line thickness.
  • At 20°C. The source gives no conditions for this time. About 1 mm per 24 hours.

How to check readiness

Test a noncritical offcut or wait for the stated load milestone before stressing the joint. The sheet gives a skin and tack-free time of 10 minutes. The sheet says to support the mirror for 24 to 48 hours. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling.

Avoid this mistake

Handling strength and full load strength are different milestones.

Compare with similar products

Keep going

Questions

How long does this product take to dry?

Everbuild (Sika) states: The sheet gives a skin and tack-free time of 10 minutes. Conditions: At 20°C.. The sheet says to support the mirror for 24 to 48 hours. Conditions: The source gives no conditions for this time.. The sheet gives full cure in 24 to 48 hours. Conditions: About 1 mm per 24 hours.. These are the manufacturer’s stated times, not a guarantee.

How long must I support a mirror stuck with Mirror Mate?

The sheet says 24 to 48 hours.

How long does this product take to fully cure?

Everbuild (Sika) states: The sheet gives full cure in 24 to 48 hours. Conditions: About 1 mm per 24 hours.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All adhesives and glues