Aqua 1K
Water-based pool coating (UK) · GB · manufacturer-sourced
How long before Epotec Aqua 1K can get wet?
Short answer
Fill-and-swim plan
Fill, circulate and swim are separate checkpoints
- Apply the Water-based pool coating (UK) to a prepared surface
- Cure for the stated time before filling
- Swim only after the stated wait
This product’s stated stages Quoted at 73°F
- Safe to touch2 hours
- Ready for another coat4 hours
- Water-ready7 days
- Full cure7 days
Worth noticing: Touch-dry comes at 2 hours, but full cure is 7 days, about 84 times longer.
Common mistake: Filling the pool before the coating has cured for the stated time.
Water-exposure plan
Splash, filling and continuous immersion are not equivalent
Splashes or dampness can use a different milestone.
Filling, launching or immersion requires the exact water milestone.
Use the Water-based pool coating (UK) directions for swimming pools and ponds; do not infer immersion readiness from touch-dry time.
Time the fill
Your countdown
Stated times
- Safe to touch2 hours
- Ready for another coat4 hours
- Water-ready7 days
- Full cure7 days
From Epotec data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: epotec.co.uk
Conditions & fine print
- Stated conditions: 73°F (23°C)
- Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
- Apply at 50°F or above
- Region GB. Formulas can differ between countries; check your container.
- Safe to touch: At 20°C.
- Ready for another coat: At 20°C.
- Water-ready: At 15°C.
- Full cure: At 20°C.
- Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Confirm this is your product
Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.
- Exact listing
- Epotec Aqua 1K
- Variant
- Water-based pool coating (UK)
- Region
- GB
- Listed use
- swimming pools, ponds
- Timed stages recorded
- touch, recoat min, water ready, full cure
- Source checked
- 2026-10-25
Documentation: Technical data sheet copy · Data sheet NOV 19
Condition attached to the stated time: At 20°C.
About this product
Touch dry at 2 hours, recoat at 4 and a 7 day wait before filling.
Using this specific product
Epotec Aqua 1K is listed here as the Water-based pool coating (UK) version for swimming pools and ponds. For repairing or coating a pool or spa, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Water-based pool coating (UK); related versions can use different timing.
- For swimming pools and ponds, pay particular attention to surface moisture, film thickness and cure temperature.
- At 20°C. At 15°C.
How to check readiness
Check the longest stated immersion milestone before filling. Touch only a hidden edge first; a dry surface can conceal a soft layer underneath. Before recoating, confirm the first coat matches the manufacturer’s stated condition; if the maximum window passed, check whether sanding is required. Test the seam or finish at the least-ventilated spot before normal water exposure.
Avoid this mistake
Dry-to-touch is not the same as ready for continuous immersion.
Compare with similar products
- Compare with Cemcrete Pool CoatingRecoat: 3 h there, 4 h here.
- Compare with Benjamin Moore Rubber-Based Pool Paint RP-27XXRecoat: 12 h to 1 day there, 4 h here.
Questions
How long before this product can get wet?
Epotec states: The sheet gives touch dry at 2 hours. Conditions: At 20°C.. The sheet gives recoat at 4 hours. Conditions: At 20°C.. The sheet says to wait a minimum of 7 days before filling. Conditions: At 15°C.. The sheet gives full cure at 7 days. Conditions: At 20°C.. These are the manufacturer’s stated times, not a guarantee.
When can I fill a pool painted with Epotec Aqua 1K?
The sheet says a minimum of 7 days at 15°C.
How long does this product take to fully cure?
Epotec states: The sheet gives full cure at 7 days. Conditions: At 20°C.. These are the manufacturer’s stated times, not a guarantee.
How long before I can apply a second coat of this product?
Epotec states: The sheet gives recoat at 4 hours. Conditions: At 20°C.. These are the manufacturer’s stated times, not a guarantee.
How long until this product is safe to touch?
Epotec states: The sheet gives touch dry at 2 hours. Conditions: At 20°C.. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.