DAP

WOODPRO-X All Purpose Wood Filler

Natural (Canada) · CA · not yet reviewed

Short answer

Ready to sand: 1 day 12 hours after application (shorter only under the manufacturer’s stated conditions — see below).

Start the clock

When did you apply it?
Outdoors, temperature, fill depth
Where?
Thickness

Shallow fills dry much faster. Without a depth we use the deep-fill time.

Stated times

  • Ready to sand1 day 12 hours*

* Shorter only under the manufacturer’s stated conditions.

From DAP data sheet · checked 2026-10-24. Anything not listed isn’t stated by the manufacturer.

Conditions & fine print
  • Stated conditions: Not stated
  • Canadian product sheet (application range given as 4–37°C). Dry time depends on temperature, humidity and depth. Latex paint can go on right after sanding; oil-based paint needs 12 hours. Stain before filling.
  • Temperature range: 39°F to 99°F
  • Region CA. Formulas can differ between countries; check your container.
  • Ready to sand: 2–6 hours if 1/8 in. deep or less
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Questions

How long before WOODPRO-X All Purpose Wood Filler is ready to sand?

DAP states: Sand after approximately 2 to 6 hours for shallow fills up to 1/8 in., or up to 36 hours in deep fills 1/4 in. and over. Conditions: 2–6 hours if 1/8 in. deep or less. This is the manufacturer’s stated time, not a guarantee.

Similar products

All paints, primers and patching