DAP

Phenopatch Stucco Patch

Ready-mixed patch for stucco · US · manufacturer-sourced

Check your container: This countdown is for the Ready-mixed patch for stucco variant. Similar-looking versions may have different times.

How long before you can paint over DAP Phenopatch Stucco Patch?

Short answer

Paint-ready: 2 hours after application.
Rain-safe: 1 day after application.
Masonry cleaners, sealers and water repellents

Masonry treatment plan

Rain-ready, dry and fully cured are different checkpoints

  1. Clean and dry the surface
  2. Apply the Ready-mixed patch for stucco
  3. Keep it dry through the stated rain-free period

This product’s stated stages Quoted at 73°F

  • Ready to paint2 hours
  • Rain-ready1 day

Worth noticing: Ready to paint at 2 hours; rain-ready at 1 day.

Common mistake: Treating a damp wall; the moisture traps and the product will not cure properly.

Masonry cleaners, sealers and water repellents

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Time the masonry treatment

When did you treat the masonry?
Conditions that affect drying
Where?
Thickness

Stated times

  • Paint-ready2 hours
  • Rain-safe1 day

From DAP data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: dap.com

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label.
  • Region US. Formulas can differ between countries; check your container.
  • Paint-ready: Oil-based paint needs about 24 hours.
  • Rain-safe: The source gives no conditions for this time.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
DAP Phenopatch Stucco Patch
Variant
Ready-mixed patch for stucco
Region
US
Listed use
stucco, exterior plaster
Timed stages recorded
paint ready, rain ready
Source checked
2026-10-25

Documentation: Technical data sheet · Technical data sheet revised 12/8/2016

Condition attached to the stated time: Oil-based paint needs about 24 hours.

About this product

A stucco patch with a paint rule that depends on the paint: about 2 hours for latex and about 24 hours for oil-based.

Using this specific product

DAP Phenopatch Stucco Patch is listed here as the Ready-mixed patch for stucco version for stucco and exterior plaster. For cleaning or sealing masonry, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Ready-mixed patch for stucco; related versions can use different timing.
  • For stucco and exterior plaster, pay particular attention to surface porosity, temperature, moisture in the substrate and rain forecast.
  • Oil-based paint needs about 24 hours. The source gives no conditions for this time.

How to check readiness

Test a small area and watch for the stated rain-free and cure times. The sheet says latex paint can go on after about 2 hours. Use this only as the rainfast milestone. It does not establish general cure or re-entry safety.

Avoid this mistake

A dry-looking surface can still be taking up a sealer or repellent.

Compare with similar products

Keep going

Questions

How long before you can paint over this product?

DAP states: The sheet says latex paint can go on after about 2 hours. Conditions: Oil-based paint needs about 24 hours.. The sheet says to protect from rain and freezing for 24 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

Can I paint Phenopatch with oil-based paint after 2 hours?

The sheet gives 2 hours for latex and about 24 hours for oil-based paint.

How long before this product can get rained on?

DAP states: The sheet says to protect from rain and freezing for 24 hours. Conditions: The source gives no conditions for this time.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Times depend on temperature, humidity, film or bead thickness and airflow. Follow the current data sheet and label. Follow the product label for your conditions.

Similar products

All masonry cleaners, sealers and water repellents