Custom Building Products

SimpleFix Pre-Mixed Adhesive & Grout

Premixed · US · not yet reviewed

Check your container: This countdown is for the Premixed variant. Similar-looking versions may have different times.

How long before Custom Building Products SimpleFix Pre-Mixed Adhesive & Grout can get wet?

Short answer

Full cure: 1 day after application.
Water-ready: 3 days after application.
Grout & tile mortar

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Calculate return-to-use time

When was the material placed?
Conditions that affect drying
Where?
Thickness

Stated times

  • Working time ends30 minutes
  • Full cure1 day
  • Water-ready3 days

From Custom Building Products data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: custombuildingproducts.com

Conditions & fine print
  • Stated conditions: Above 50°F (10°C)
  • Tile must be firmly attached and the adhesive cured 24 to 48 hours before grouting. Keep surfaces and materials between 50°F and 100°F for 72 hours.
  • Temperature range: 50°F to 100°F
  • Region US. Formulas can differ between countries; check your container.
  • Full cure: Above 50°F
  • Water-ready: Shower walls; shower floors need 7 days
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

Custom Building Products SimpleFix Pre-Mixed Adhesive & Grout is listed here as the Premixed version for tile, backsplash, and shower walls. For grouting tile, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Premixed; related versions can use different timing.
  • For tile, backsplash, and shower walls, pay particular attention to joint depth, water ratio, cleanup and room conditions.
  • Above 50°F. Shower walls; shower floors need 7 days.

How to check readiness

Inspect shaded joints and verify the stated water or traffic milestone. Do not apply more adhesive than can be covered with tile in 30 minutes. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling. Test the seam or finish at the least-ventilated spot before normal water exposure.

Avoid this mistake

Color change alone does not prove the joint is ready for immersion.

Questions

How long until I can shower after using this product?

Custom Building Products states: Allow 3 days for water exposure on shower walls and 7 days on shower floors. Conditions: Shower walls; shower floors need 7 days. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to dry?

Custom Building Products states: Cure time: typically 24 hours for temperatures above 50°F. Conditions: Above 50°F. Allow 3 days for water exposure on shower walls and 7 days on shower floors. Conditions: Shower walls; shower floors need 7 days. Do not apply more adhesive than can be covered with tile in 30 minutes. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to fully cure?

Custom Building Products states: Cure time: typically 24 hours for temperatures above 50°F. Conditions: Above 50°F. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Tile must be firmly attached and the adhesive cured 24 to 48 hours before grouting. Keep surfaces and materials between 50°F and 100°F for 72 hours. Application temperature: 50°F to 100°F. Follow the product label for your conditions.

Similar products

All grout and tile mortar