RedGard Waterproofing and Crack Prevention Membrane
Liquid (pink, dries red) · US · not yet reviewed
How long does Custom Building Products RedGard Waterproofing and Crack Prevention Membrane take to dry?
Short answer
Return-to-use gates
Open the surface gradually instead of treating cure as one moment
Calculate return-to-use time
Your countdown
Stated times
- Fully dry1 hour to 1 hour 30 minutes
From Custom Building Products data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.
Manufacturer website: custombuildingproducts.com
Conditions & fine print
- Stated conditions: Not stated in the data sheet
- Dry means it has turned from pink to solid red. Apply the second coat after the first turns red; flood test only after both coats are fully cured. No flood-test time is published. Do not apply if surfaces may drop below 40°F within 72 hours.
- Temperature range: 40°F to —°F
- Region US. Formulas can differ between countries; check your container.
- Fully dry: Can take up to 12 hours
- Entered from the manufacturer source; second review pending. Report outdated information
- Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.
Using this specific product
Custom Building Products RedGard Waterproofing and Crack Prevention Membrane is listed here as the Liquid (pink, dries red) version for shower, tub surround, and bathroom. For grouting tile, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.
Before you start
- Confirm the package says Liquid (pink, dries red); related versions can use different timing.
- For shower, tub surround, and bathroom, pay particular attention to joint depth, water ratio, cleanup and room conditions.
- Can take up to 12 hours.
How to check readiness
Inspect shaded joints and verify the stated water or traffic milestone. Wait until the membrane has turned from pink to solid red before recoating or tiling. Typical drying time is 1–1.5 hours; depending on ambient conditions it can be as much as 12 hours.
Avoid this mistake
Color change alone does not prove the joint is ready for immersion.
Questions
How long until I can shower after using this product?
Custom Building Products does not state a shower or water-ready time for this product in its source document. The nearest stated time. Custom Building Products states: Typical drying time is 1–1.5 hours; depending on ambient conditions it can be as much as 12 hours. Conditions: Can take up to 12 hours. These are the manufacturer’s stated times, not a guarantee. Check the container for the latest instructions.
How long does this product take to dry?
Custom Building Products states: Typical drying time is 1–1.5 hours; depending on ambient conditions it can be as much as 12 hours. Conditions: Can take up to 12 hours. These are the manufacturer’s stated times, not a guarantee.
How long does this product take to fully cure?
Custom Building Products states: Typical drying time is 1–1.5 hours; depending on ambient conditions it can be as much as 12 hours. Conditions: Can take up to 12 hours. These are the manufacturer’s stated times, not a guarantee.
What affects how long this product takes to dry or cure?
Dry means it has turned from pink to solid red. Apply the second coat after the first turns red; flood test only after both coats are fully cured. No flood-test time is published. Do not apply if surfaces may drop below 40°F within 72 hours. Application temperature: 40°F to —°F. Follow the product label for your conditions.
Similar products
- MAPEI Flexcolor CQ Ready-to-Use GroutAll colors (premixed) · Grout & tile mortar · USLight traffic 1 day
- MAPEI Ultracolor Plus FA GroutAll colors (North American formula) · Grout & tile mortar · USLight traffic 3–4 hours
- Custom Building Products Fusion Pro Single Component GroutAll colors (sanded) · Grout & tile mortar · USLight traffic 1 day