Custom Building Products

Polyblend Plus Non-Sanded Grout

All colors (cement-based) · US · not yet reviewed

Check your container: This countdown is for the All colors (cement-based) variant. Similar-looking versions may have different times.

How long does Custom Building Products Polyblend Plus Non-Sanded Grout take to dry?

Short answer

Full cure: 3 days after application.
Rain-safe: 7 days after application.
Grout & tile mortar

Return-to-use gates

Open the surface gradually instead of treating cure as one moment

Touch / inspectA surface check only
Foot trafficUse the stated walking time
Heavy useWait for furniture, water or vehicle readiness

Calculate return-to-use time

When was the material placed?
Conditions that affect drying
Where?
Thickness

Stated times

  • Full cure3 days
  • Rain-safe7 days

From Custom Building Products data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: custombuildingproducts.com

Conditions & fine print
  • Stated conditions: Above 50°F (10°C)
  • Pot life is 1 to 2 hours. Haze can be removed after 3 hours. The sheet gives no set, light-traffic, heavy-traffic or water-ready time. Do not install below 50°F or above 100°F.
  • Temperature range: 50°F to 100°F
  • Region US. Formulas can differ between countries; check your container.
  • Full cure: Above 50°F
  • Rain-safe: Exterior installations, above 50°F
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

Custom Building Products Polyblend Plus Non-Sanded Grout is listed here as the All colors (cement-based) version for tile, wall, and backsplash. For grouting tile, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says All colors (cement-based); related versions can use different timing.
  • For tile, wall, and backsplash, pay particular attention to joint depth, water ratio, cleanup and room conditions.
  • Above 50°F. Exterior installations, above 50°F.

How to check readiness

Inspect shaded joints and verify the stated water or traffic milestone. Reserve full cure for demanding use, chemicals, washing, immersion or load—not merely gentle handling. Use this only as the rainfast milestone. It does not establish general cure or re-entry safety.

Avoid this mistake

Color change alone does not prove the joint is ready for immersion.

Questions

How long until I can shower after using this product?

Custom Building Products does not state a shower or water-ready time for this product in its source document. The nearest stated time. Custom Building Products states: Enclose and protect the installation and maintain temperatures above 50°F for at least 72 hours for proper cure. Conditions: Above 50°F. These are the manufacturer’s stated times, not a guarantee. Check the container for the latest instructions.

How long until this product can get rained on?

Custom Building Products states: Exterior installations must be protected from rain, snow and other wet conditions for at least 7 days. Conditions: Exterior installations, above 50°F. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to dry?

Custom Building Products states: Enclose and protect the installation and maintain temperatures above 50°F for at least 72 hours for proper cure. Conditions: Above 50°F. Exterior installations must be protected from rain, snow and other wet conditions for at least 7 days. Conditions: Exterior installations, above 50°F. These are the manufacturer’s stated times, not a guarantee.

How long does this product take to fully cure?

Custom Building Products states: Enclose and protect the installation and maintain temperatures above 50°F for at least 72 hours for proper cure. Conditions: Above 50°F. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Pot life is 1 to 2 hours. Haze can be removed after 3 hours. The sheet gives no set, light-traffic, heavy-traffic or water-ready time. Do not install below 50°F or above 100°F. Application temperature: 50°F to 100°F. Follow the product label for your conditions.

Similar products

All grout and tile mortar