Clorox

Clean-Up Cleaner + Bleach

Original spray / mold remover · US · not yet reviewed

Check your container: This countdown is for the Original spray / mold remover variant. Similar-looking versions may have different times.

How long should Clorox Clean-Up Cleaner + Bleach stay wet to disinfect?

Short answer

Disinfection contact time complete: 5 minutes after application.
Used for chemical exposure: elapsed time alone can’t confirm it’s ready. Inspect or test before loading.
Disinfecting cleaners

Treatment safety gate

Elapsed time is only one condition for the next action

Time alone does not clear the next step

The full surface must remain visibly wet for the complete contact time.

Exact version
Original spray / mold remover
Intended use
mold, mildew, and bathroom

Track the treatment interval

When did treatment begin?

Stated times

  • Disinfection contact time complete5 minutes

From Clorox product page · checked 2026-10-26. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: clorox.com

Conditions & fine print
  • Stated conditions: Not stated by the manufacturer
  • Contact times apply only when the surface remains visibly wet for the full stated period and the label directions are followed. Preclean when required. Never mix cleaning products. Rinse food-contact surfaces when the label requires it. Contains bleach; follow all ventilation and compatibility warnings on the label.
  • Region US. Formulas can differ between countries; check your container.
  • Disinfection contact time complete: Hard, nonporous surfaces; preclean visibly soiled surfaces.
  • Entered from the manufacturer source; second review pending. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Using this specific product

Clorox Clean-Up Cleaner + Bleach is listed here as the Original spray / mold remover version for mold, mildew, and bathroom. For disinfecting a surface, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Original spray / mold remover; related versions can use different timing.
  • For mold, mildew, and bathroom, pay particular attention to precleaning and applying enough product to keep the entire area visibly wet.
  • Hard, nonporous surfaces; preclean visibly soiled surfaces.

How to check readiness

Restart the contact time if the surface dries before the stated interval ends. The entire surface must remain visibly wet for the complete contact interval.

Avoid this mistake

Contact time is continuous wet time, not simply time since the first spray.

Questions

How long should this product stay wet to disinfect?

Clorox states: The treated surface must remain visibly wet for 5 minutes to kill mold and mildew. Conditions: Hard, nonporous surfaces; preclean visibly soiled surfaces.. These are the manufacturer’s stated times, not a guarantee.

What affects how long this product takes to dry or cure?

Contact times apply only when the surface remains visibly wet for the full stated period and the label directions are followed. Preclean when required. Never mix cleaning products. Rinse food-contact surfaces when the label requires it. Contains bleach; follow all ventilation and compatibility warnings on the label. Follow the product label for your conditions.

Similar products

All disinfecting cleaners