Ardec

Smart Strip Advanced Paint Remover

Paste stripper · Canada · manufacturer-sourced

Check your container: This countdown is for the Paste stripper variant. Similar-looking versions may have different times.

How long should you leave Ardec Smart Strip Advanced Paint Remover on before rinsing?

Short answer

Ready to rinse: 1 hour to 1 day after application.
Strippers, brighteners and surface cleaners

Prep dwell and rinse

Dwell, rinse and dry run before the next coat

  1. Apply the Paste stripper and keep it wet
  2. Let it dwell for the stated time
  3. Rinse and dry before coating

This product’s stated stages Quoted at 73°F

  • Rinse1 hour to 1 day

Worth noticing: The manufacturer states only one timing here (rinse, 1 hour to 1 day); nothing else is inferred.

Common mistake: Letting a stripper dry on the surface or skipping the rinse.

Strippers, brighteners and surface cleaners

Treatment safety gate

Elapsed time is only one condition for the next action

Time alone does not clear the next step

Do not exceed a stated maximum; check material compatibility first.

Exact version
Paste stripper
Intended use
paint removal and multi-layer paint

Time the dwell

When did the product go on?

Stated times

  • Ready to rinse1 hour to 1 day

From Ardec data sheet · checked 2026-10-25. Anything not listed isn’t stated by the manufacturer.

Manufacturer website: ardec.ca

Conditions & fine print
  • Stated conditions: 73°F (23°C)
  • Contact times depend on temperature and how porous the surface is. Follow the current label, wear the protective gear it lists and test a small area first.
  • Temperature range: 40°F to 90°F
  • Region Canada. Formulas can differ between countries; check your container.
  • Ready to rinse: Designed for 40°F to 90°F per the sheet.
  • Entered from the cited manufacturer documentation. Check the current label for the exact formula and region. Report outdated information
  • Actual results depend on preparation, thickness, ventilation, temperature, humidity, mixing and substrate.

Confirm this is your product

Closely named formulas, colors and regional versions can use different times. Match these details to your container before starting a countdown.

Exact listing
Ardec Smart Strip Advanced Paint Remover
Variant
Paste stripper
Region
Canada
Listed use
paint removal, multi-layer paint
Timed stages recorded
rinse ready
Source checked
2026-10-25

Documentation: Technical data sheet · TDS revision 2023/06

Condition attached to the stated time: Designed for 40°F to 90°F per the sheet.

About this product

A paste stripper that works slowly on purpose, removed with a scraper or pressure washer rather than wiped off. The June 2023 data sheet gives 1 to 24 hours and 40 to 90°F. An older 2017 sheet for the same stripper asked for at least 3 hours and temperatures above 50°F, so check which label is on the pail.

Using this specific product

Ardec Smart Strip Advanced Paint Remover is listed here as the Paste stripper version for paint removal and multi-layer paint. For stripping or cleaning a surface, the useful question is not simply whether the surface looks finished—it is whether the exact next-action milestone shown above has been reached.

Before you start

  • Confirm the package says Paste stripper; related versions can use different timing.
  • For paint removal and multi-layer paint, pay particular attention to surface temperature, how much coating or soil is present and keeping the product wet.
  • Designed for 40°F to 90°F per the sheet.

How to check readiness

Check a small test patch before committing to the full dwell and rinse. Use the stated range for this formula; rinse sooner if its directions tell you to stop for irritation.

Avoid this mistake

A longer dwell is not always better; follow the stated maximum and keep the product from drying out.

Keep going

Questions

How long should you leave this product on before rinsing?

Ardec states: The 2023 data sheet allows 1 to 24 hours to remove paint layers. Conditions: Designed for 40°F to 90°F per the sheet.. These are the manufacturer’s stated times, not a guarantee.

What changed between the 2017 and 2023 Smart Strip sheets?

The 2023 sheet gives 1 to 24 hours and 40 to 90°F. The 2017 sheet says to dwell at least 3 hours and to use it above 50°F. Both say not to leave it on more than 24 hours.

What affects how long this product takes to dry or cure?

Contact times depend on temperature and how porous the surface is. Follow the current label, wear the protective gear it lists and test a small area first. Follow the product label for your conditions.

Similar products

All strippers, brighteners and surface cleaners