ACTION HUB
How long before a finish is ready for food contact?
Use the milestone for food contact, not a generic dry-to-touch time. The table below is built only from numeric times in manufacturer documents already recorded in our catalog.
Important: Shortest does not mean interchangeable. Product type, surface, conditions and intended use still have to match your project.
Manufacturer-stated times
| Product | Manufacturer-stated minimum | Condition/source |
|---|---|---|
| Howard Products Butcher Block Conditioner Mineral oil and wax | 1 hours | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Walrus Oil Cutting Board Oil Food-safe oil blend | 1 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Odie's Odie's Oil Universal Finish Hardwax oil | 7 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Stone Coat Countertops Countertop Epoxy Two-part countertop epoxy | 7 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Tried & True Original Wood Finish Linseed oil and beeswax | 7 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Walrus Oil Furniture Finish Polymerizing safflower oil | 7 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Waterlox Original Sealer & Semi-Gloss Finish Tung-oil finish | 7 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Osmo TopOil Clear matte | 14 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| General Finishes Salad Bowl Finish Oil-based urethane | 30 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
| Real Milk Paint Pure Tung Oil 100% pure tung oil | 30 days | At manufacturer-stated conditions; temperature, humidity and film thickness can change drying time. |
How to use this table
Open the exact product page to see the variant, source wording, stated conditions and other milestones. A minimum time is the earliest stated threshold under the manufacturer’s conditions—not a guarantee for colder, wetter, thicker or poorly ventilated applications.
Related checks
- Confirm the exact formula and region on your container.
- Use the clock for your next action rather than touch-dry time.
- Check temperature, humidity, thickness and substrate notes.
- When the manufacturer provides no correction factor, wait longer and verify physical readiness.